Exynos's host has divider logic before 'cclk_in' to controller core.
It means that actual clock rate of ciu clock comes from this divider
value. So, source clock should be adjusted along with 'ciu_div' which
indicates the host's divider ratio. Setting clock rate basically fits
the required speed. Specially, 'cclk_in' should have double rate of
target speed in case of DDR 8-bit mode.
Signed-off-by: Seungwon Jeon <tgih.jun@xxxxxxxxxxx>
---
drivers/mmc/host/dw_mmc-exynos.c | 44 ++++++++++++++++++++++++++++---------
1 files changed, 33 insertions(+), 11 deletions(-)
diff --git a/drivers/mmc/host/dw_mmc-exynos.c b/drivers/mmc/host/dw_mmc-exynos.c
index 90f9335..f16e2fc 100644
--- a/drivers/mmc/host/dw_mmc-exynos.c
+++ b/drivers/mmc/host/dw_mmc-exynos.c
@@ -49,6 +49,7 @@ struct dw_mci_exynos_priv_data {
u8 ciu_div;
u32 sdr_timing;
u32 ddr_timing;
+ u32 cur_speed;
};
static struct dw_mci_exynos_compatible {
@@ -91,14 +92,9 @@ static int dw_mci_exynos_priv_init(struct dw_mci *host)
static int dw_mci_exynos_setup_clock(struct dw_mci *host)
{
struct dw_mci_exynos_priv_data *priv = host->priv;
+ unsigned long rate = clk_get_rate(host->ciu_clk);
- if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS5250)
- host->bus_hz /= (priv->ciu_div + 1);
- else if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS4412)
- host->bus_hz /= EXYNOS4412_FIXED_CIU_CLK_DIV;
- else if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS4210)
- host->bus_hz /= EXYNOS4210_FIXED_CIU_CLK_DIV;
-
+ host->bus_hz = rate / (priv->ciu_div + 1);
return 0;
}
@@ -118,11 +114,31 @@ static void dw_mci_exynos_prepare_command(struct dw_mci *host, u32 *cmdr)
static void dw_mci_exynos_set_ios(struct dw_mci *host, struct mmc_ios *ios)
{
struct dw_mci_exynos_priv_data *priv = host->priv;
+ unsigned int wanted = ios->clock;
+ unsigned long actual;
+ u8 div = priv->ciu_div + 1;
+
- if (ios->timing == MMC_TIMING_UHS_DDR50)
+ if (ios->timing == MMC_TIMING_UHS_DDR50) {
mci_writel(host, CLKSEL, priv->ddr_timing);
- else
+ /* Should be double rate for DDR mode */
+ if (ios->bus_width == MMC_BUS_WIDTH_8)
+ wanted <<= 1;
+ } else {
mci_writel(host, CLKSEL, priv->sdr_timing);
+ }
+
+ if (wanted && (priv->cur_speed != wanted)) {
+ int ret = clk_set_rate(host->ciu_clk, wanted * div);
+ if (ret)
+ dev_warn(host->dev,
+ "failed to set clk-rate %u error: %d\n",
+ wanted * div, ret);
+ actual = clk_get_rate(host->ciu_clk);
+ host->bus_hz = actual / div;
+ priv->cur_speed = wanted;
+ host->current_speed = 0;
+ }
}
static int dw_mci_exynos_parse_dt(struct dw_mci *host)
@@ -133,8 +149,14 @@ static int dw_mci_exynos_parse_dt(struct dw_mci *host)
u32 div = 0;
int ret;
- of_property_read_u32(np, "samsung,dw-mshc-ciu-div", &div);
- priv->ciu_div = div;
+ if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS4412)
+ priv->ciu_div = EXYNOS4412_FIXED_CIU_CLK_DIV - 1;
+ else if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS4210)
+ priv->ciu_div = EXYNOS4210_FIXED_CIU_CLK_DIV - 1;
+ else {
+ of_property_read_u32(np, "samsung,dw-mshc-ciu-div", &div);
+ priv->ciu_div = div;
+ }
ret = of_property_read_u32_array(np,
"samsung,dw-mshc-sdr-timing", timing, 2);
--
1.7.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
