Hi Yuvaraj,
On Wednesday 21 of August 2013 12:13:53 Yuvaraj Kumar C D wrote:
> This patch adds the device tree node entries for exynos5420 SOC.
> Exynos5420 has a different version of DWMMC controller,so a new
> compatible string is used to distinguish it from the prior SOC's.
What are the difference between both versions? Is there a patch adding the
new compatible to the driver somewhere?
> changes since V1:
> 1.disable node by status = disabled in SOC file
> 2.enable node by status = okay in board specific file
Ahh, so you fixed this already in this version, thanks. Haven't noticed
this patch at first and commented on previous one. Sorry for the noise.
>
> Signed-off-by: Yuvaraj Kumar C D <yuvaraj.cd@xxxxxxxxxxx>
> ---
> .../devicetree/bindings/mmc/exynos-dw-mshc.txt | 2 ++
> arch/arm/boot/dts/exynos5420-smdk5420.dts | 38
> ++++++++++++++++++++ arch/arm/boot/dts/exynos5420.dtsi
> | 36 +++++++++++++++++++ 3 files changed, 76 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt
> b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt index
> 6d1c098..84cd56f 100644
> --- a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt
> +++ b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt
> @@ -16,6 +16,8 @@ Required Properties:
> specific extensions.
> - "samsung,exynos5250-dw-mshc": for controllers with Samsung Exynos5250
> specific extensions.
> + - "samsung,exynos5420-dw-mshc": for controllers with Samsung Exynos5420
> + specific extensions.
>
> * samsung,dw-mshc-ciu-div: Specifies the divider value for the card
> interface unit (ciu) clock. This property is applicable only for Exynos5
> SoC's and diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts
> b/arch/arm/boot/dts/exynos5420-smdk5420.dts index bafba25..6e65278
> 100644
> --- a/arch/arm/boot/dts/exynos5420-smdk5420.dts
> +++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts
> @@ -31,6 +31,44 @@
> };
> };
>
> + dwmmc0@12200000 {
> + status = "okay";
> + num-slots = <1>;
You don't have to specify this property if there is only one slot. Also are
you sure that this is a board specific property?
> + broken-cd;
> + bypass-smu;
This property doesn't seem to be documented nor used anywhere.
> + supports-highspeed;
Is it a board specific property?
> + fifo-depth = <0x80>;
Ditto.
> + card-detect-delay = <200>;
> + samsung,dw-mshc-ciu-div = <3>;
> + samsung,dw-mshc-sdr-timing = <0 4>;
> + samsung,dw-mshc-ddr-timing = <0 2>;
Are the above three properties really board-specific?
Same for remaining nodes.
Best regards,
Tomasz
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
