Hello, This patch set replaces callbacks to board code with regulators and GPIOs in the mmc_spi, sh_mmcif and sh_mobile_sdhi MMC drivers. Most of the required infrastructure is in place already on the drivers side, except for CD debouncing support in the MMC core and CD/RO GPIOs support in the mmc_spi driver. The series thus starts with patches 01/14 and 02/14 that add those features to the MMC core and mmc_spi driver. Patches 03/14 to 07/14 remove the board callbacks from the ecovec24 and vision_ep9307 boards. The code has been compile-tested only as I don't have access to those boards. Patches 08/14 to 14/14 then proceed to remove the callbacks from the drivers themselves and from the platform data structures. Compared to v2, the patches have been rebased on the mmc-next branch from git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc.git. I've also added patch 07/14 that removes the .set_pwr() callback from the ag5evm board to avoid compilation breakage during bisection. The series interleaves patches for drivers and board files. The ep93xx and ecovec24 patches have been acked, and the respective ARM subtree maintainers have indicated that they are fine with the patches going through the MMC tree. The ag5evm patch is new, but as the ag5evm board is going to be removed in v3.12, it shouldn't cause any issue. Chris, could you take the patches in your tree ? I've pushed them to git://linuxtv.org/pinchartl/fbdev.git mmc/devel Laurent Pinchart (14): mmc: slot-gpio: Add debouncing capability to mmc_gpio_request_cd() mmc: mmc_spi: Support CD/RO GPIOs ARM: ep93xx: vision_ep9307: Use MMC CD and RO GPIO sh: ecovec24: Use MMC/SDHI CD and RO GPIO sh: ecovec24: Remove mmcif .down_pwr() callback sh: ecovec24: Remove MMCIF and SDHI .set_pwr() callbacks ARM: shmobile: ag5evm: Remove SDHI .set_pwr() callback mmc: mmc_spi: Remove platform data .get_cd() and .get_ro() callbacks mmc: sh_mmcif: Remove .down_pwr() callback from platform data mmc: sh_mmcif: Remove .set_pwr() callback from platform data mmc: sh_mobile_sdhi: Remove .get_cd() callback from platform data mmc: sh_mobile_sdhi: Remove .set_pwr() callback from platform data mmc: tmio-mmc: Remove .get_cd() callback from platform data mmc: tmio-mmc: Remove .set_pwr() callback from platform data arch/arm/mach-ep93xx/vision_ep9307.c | 57 ++-------------------- arch/arm/mach-shmobile/board-ag5evm.c | 23 --------- arch/sh/boards/mach-ecovec24/setup.c | 89 ++++------------------------------- drivers/mmc/core/host.c | 2 +- drivers/mmc/core/slot-gpio.c | 14 +++++- drivers/mmc/host/jz4740_mmc.c | 2 +- drivers/mmc/host/mmc_spi.c | 49 +++++++++---------- drivers/mmc/host/mvsdio.c | 3 +- drivers/mmc/host/of_mmc_spi.c | 46 +++++------------- drivers/mmc/host/sdhci-esdhc-imx.c | 2 +- drivers/mmc/host/sdhci-pxav3.c | 3 +- drivers/mmc/host/sdhci-sirf.c | 2 +- drivers/mmc/host/sh_mmcif.c | 5 +- drivers/mmc/host/sh_mobile_sdhi.c | 18 ------- drivers/mmc/host/tmio_mmc.h | 1 - drivers/mmc/host/tmio_mmc_pio.c | 25 +--------- include/linux/mfd/tmio.h | 2 - include/linux/mmc/sh_mmcif.h | 2 - include/linux/mmc/sh_mobile_sdhi.h | 2 - include/linux/mmc/slot-gpio.h | 3 +- include/linux/spi/mmc_spi.h | 19 +++++--- 21 files changed, 86 insertions(+), 283 deletions(-) -- Regards, Laurent Pinchart -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
