Hi, Anton You mean get voltage support from DTS? Or get voltage both from DTS and host capacity register? Thanks. Regards Haijun. > -----Original Message----- > From: linux-mmc-owner@xxxxxxxxxxxxxxx [mailto:linux-mmc- > owner@xxxxxxxxxxxxxxx] On Behalf Of Anton Vorontsov > Sent: Saturday, July 13, 2013 2:35 AM > To: Wood Scott-B07421 > Cc: Zhang Haijun-B42677; linux-mmc@xxxxxxxxxxxxxxx; linuxppc- > dev@xxxxxxxxxxxxxxxx; cjb@xxxxxxxxxx; Fleming Andy-AFLEMING; Wrobel > Heinz-R39252 > Subject: Re: [PATCH 3/4 V2] mmc: esdhc: Add quirks to support T4240QDS > board > > On Mon, Jul 08, 2013 at 12:18:39PM -0500, Scott Wood wrote: > > On 07/08/2013 02:16:04 AM, Haijun Zhang wrote: > > >On T4240QDS board controllers has an unusable ADMA engine, so use > > >SDMA instead. > > >Also 3.0v is support on T4240QDS board even if the capacity detailed > > >only 1.8v support. Without this quirk SD card will declare voltage > > >not support and > > > > > >Signed-off-by: Haijun Zhang <haijun.zhang@xxxxxxxxxxxxx> > > > > ...and what? > > > > Why is this board-specific? Isn't the controller part of the SoC, not > > part of the board? If it really is board-specific, could you be more > > detailed about why (ideally with an erratum number), and check the > > toplevel board compatible (or get the information from platform > > code) rather than modify the device tree? > > Yup, and if anything, I would recommend to reuse voltage-ranges property, > it is already implemented for mmc spi driver, > > drivers/mmc/host/of_mmc_spi.c > Documentation/devicetree/bindings/mmc/mmc-spi-slot.txt > > Thanks, > > Anton > -- > To unsubscribe from this list: send the line "unsubscribe linux-mmc" in > the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at > http://vger.kernel.org/majordomo-info.html ��.n��������+%������w��{.n�����{��i��)�� jg��� �����ݢj����G���� ���j:+v���w�m������w�������h�����٥
