Re: [PATCH v12 02/11] ARM: edma: Add DT and runtime PM support to the private EDMA API

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Jun 21, 2013 at 4:37 AM, Sekhar Nori <nsekhar@xxxxxx> wrote:
> Joel,
>
> Looks like you have not addressed all comments from last time.
> For now, in the interest of time, I have fixed them myself. But next
> time on, if you are not going to fix any comment, then please reply
> upfront before sending out *any* new versions.

Will do. I thought there was just 1 other disagreement. Neverthless
I will make it a point to reply upfront next time.

> Also, *please* run checkpatch and fix all build warnings before you send
> the patch out. You seem to have introduced new checkpatch errors and
> compile warnings with this version.

Ok, this really sucks. Somehow I missed the new checkpatch error.
Thanks for fixing it & Sorry.

Joel

> On 6/21/2013 2:36 AM, Joel A Fernandes wrote:
>> From: Matt Porter <mporter@xxxxxx>
>>
>> Adds support for parsing the TI EDMA DT data into the required EDMA
>> private API platform data. Enables runtime PM support to initialize
>> the EDMA hwmod. Enables build on OMAP.
>>
>> Changes by Joel:
>> * Setup default one-to-one mapping for queue_priority and queue_tc
>> mapping as discussed in [1].
>> * Split out xbar stuff to separate patch. [1]
>> * Dropped unused DT helper to convert to array
>>
>> [1] https://patchwork.kernel.org/patch/2226761/
>>
>> Signed-off-by: Matt Porter <mporter@xxxxxx>
>> Acked-by: Sekhar Nori <nsekhar@xxxxxx>
>> Signed-off-by: Joel A Fernandes <joelagnel@xxxxxx>
>> ---
>>  arch/arm/common/edma.c             |  180 +++++++++++++++++++++++++++++++++---
>>  include/linux/platform_data/edma.h |    4 +-
>>  2 files changed, 169 insertions(+), 15 deletions(-)
>>
>> diff --git a/arch/arm/common/edma.c b/arch/arm/common/edma.c
>> index 7658874..407e01e 100644
>> --- a/arch/arm/common/edma.c
>> +++ b/arch/arm/common/edma.c
>> @@ -25,6 +25,13 @@
>>  #include <linux/platform_device.h>
>>  #include <linux/io.h>
>>  #include <linux/slab.h>
>> +#include <linux/edma.h>
>> +#include <linux/err.h>
>> +#include <linux/of_address.h>
>> +#include <linux/of_device.h>
>> +#include <linux/of_dma.h>
>> +#include <linux/of_irq.h>
>> +#include <linux/pm_runtime.h>
>>
>>  #include <linux/platform_data/edma.h>
>>
>> @@ -1369,13 +1376,102 @@ void edma_clear_event(unsigned channel)
>>  }
>>  EXPORT_SYMBOL(edma_clear_event);
>>
>> -/*-----------------------------------------------------------------------*/
>> +static int edma_of_read_u32_to_s16_array(const struct device_node *np,
>> +                                      const char *propname, s16 *out_values,
>> +                                      size_t sz)
>> +{
>> +     int ret;
>> +
>> +     ret = of_property_read_u16_array(np, propname, out_values, sz);
>> +     if (ret)
>> +             return ret;
>> +
>> +     /* Terminate it */
>> +     *out_values++ = -1;
>> +     *out_values++ = -1;
>> +
>> +     return 0;
>> +}
>
> I asked you to get rid of unused functions last time around. This
> function is unused here.
>
>> +
>> +static int edma_of_parse_dt(struct device *dev,
>> +                         struct device_node *node,
>> +                         struct edma_soc_info *pdata)
>> +{
>> +     int ret = 0, i;
>> +     u32 value;
>> +     struct property *prop;
>> +     size_t sz;
>
> sz and prop are not used in this function and result in unused variable
> warnings.
>
>> +     struct edma_rsv_info *rsv_info;
>> +     s8 (*queue_tc_map)[2], (*queue_priority_map)[2];
>> +
>> +     memset(pdata, 0, sizeof(struct edma_soc_info));
>> +
>> +     ret = of_property_read_u32(node, "dma-channels", &value);
>> +     if (ret < 0)
>> +             return ret;
>> +     pdata->n_channel = value;
>> +
>> +     ret = of_property_read_u32(node, "ti,edma-regions", &value);
>> +     if (ret < 0)
>> +             return ret;
>> +     pdata->n_region = value;
>> +
>> +     ret = of_property_read_u32(node, "ti,edma-slots", &value);
>> +     if (ret < 0)
>> +             return ret;
>> +     pdata->n_slot = value;
>> +
>> +     pdata->n_cc = 1;
>> +     pdata->n_tc = 3;
>
> n_tc setting is not used in driver as I mentioned last time. I dropped
> this line.
>
>> +
>> +     rsv_info =
>> +             devm_kzalloc(dev, sizeof(struct edma_rsv_info), GFP_KERNEL);
>> +     if (!rsv_info)
>> +             return -ENOMEM;
>> +     pdata->rsv = rsv_info;
>> +
>> +     queue_tc_map = devm_kzalloc(dev, 8*sizeof(s8), GFP_KERNEL);
>> +     if (!queue_tc_map)
>> +             return -ENOMEM;
>> +
>> +     for (i = 0; i < 3; i++) {
>> +             queue_tc_map[i][0] = i;
>> +             queue_tc_map[i][1] = i;
>> +     }
>> +     queue_tc_map[i][0] = -1;
>> +     queue_tc_map[i][1] = -1;
>> +
>> +     pdata->queue_tc_mapping = queue_tc_map;
>> +
>> +     queue_priority_map = devm_kzalloc(dev, 8*sizeof(s8), GFP_KERNEL);
>> +     if (!queue_priority_map)
>> +             return -ENOMEM;
>> +
>> +     for (i = 0; i < 3; i++) {
>> +             queue_priority_map[i][0] = i;
>> +             queue_priority_map[i][1] = i;
>> +     }
>> +     queue_priority_map[i][0] = -1;
>> +     queue_priority_map[i][1] = -1;
>> +
>> +     pdata->queue_priority_mapping = queue_priority_map;
>> +
>> +     pdata->default_queue = 0;
>> +
>> +     return ret;
>> +}
>> +
>> +static struct of_dma_filter_info edma_filter_info = {
>> +     .filter_fn = edma_filter_fn,
>> +};
>>
>> -static int __init edma_probe(struct platform_device *pdev)
>> +static int edma_probe(struct platform_device *pdev)
>>  {
>>       struct edma_soc_info    **info = pdev->dev.platform_data;
>> -     const s8                (*queue_priority_mapping)[2];
>> -     const s8                (*queue_tc_mapping)[2];
>> +     struct edma_soc_info    *ninfo[EDMA_MAX_CC] = {NULL};
>> +     struct edma_soc_info    tmpinfo;
>> +     s8              (*queue_priority_mapping)[2];
>> +     s8              (*queue_tc_mapping)[2];
>>       int                     i, j, off, ln, found = 0;
>>       int                     status = -1;
>>       const s16               (*rsv_chans)[2];
>> @@ -1383,17 +1479,56 @@ static int __init edma_probe(struct platform_device *pdev)
>>       int                     irq[EDMA_MAX_CC] = {0, 0};
>>       int                     err_irq[EDMA_MAX_CC] = {0, 0};
>>       struct resource         *r[EDMA_MAX_CC] = {NULL};
>> +     struct resource         res[EDMA_MAX_CC];
>>       char                    res_name[10];
>>       char                    irq_name[10];
>> +     struct device_node      *node = pdev->dev.of_node;
>> +     struct device           *dev = &pdev->dev;
>> +     int                     ret;
>> +
>> +     if (node) {
>> +             /* Check if this is a second instance registered */
>> +             if (arch_num_cc) {
>> +                     dev_err(dev, "only one EDMA instance is supported via DT\n");
>> +                     return -ENODEV;
>> +             }
>> +             info = ninfo;
>> +             edma_of_parse_dt(dev, node, &tmpinfo);
>
> As I mentioned last time, this potentially leaks memory since you need
> to return error for the memory allocated through devres APIs to get freed.
>
>> +             info[0] = &tmpinfo;
>> +
>> +             dma_cap_set(DMA_SLAVE, edma_filter_info.dma_cap);
>> +             of_dma_controller_register(dev->of_node,
>> +                                        of_dma_simple_xlate,
>> +                                        &edma_filter_info);
>
> It turns out this patch fails to build if CONFIG_DMADEVICES is not
> enabled. I fixed that in my version. And no, forcing DMADEVICES to be
> on all the time is not right. More on that later.
>
>> +     }
>>
>>       if (!info)
>>               return -ENODEV;
>>
>> +     pm_runtime_enable(dev);
>> +     ret = pm_runtime_get_sync(dev);
>> +     if (ret < 0) {
>> +             dev_err(dev, "pm_runtime_get_sync() failed\n");
>> +             return ret;
>> +     }
>> +
>>       for (j = 0; j < EDMA_MAX_CC; j++) {
>> -             sprintf(res_name, "edma_cc%d", j);
>> -             r[j] = platform_get_resource_byname(pdev, IORESOURCE_MEM,
>> +             if (!info[j]) {
>> +                     if (!found)
>> +                             return -ENODEV;
>> +                     break;
>> +             }
>> +             if (node) {
>> +                     ret = of_address_to_resource(node, j, &res[j]);
>> +                     if (!ret)
>> +                             r[j] = &res[j];
>> +             } else {
>> +                     sprintf(res_name, "edma_cc%d", j);
>> +                     r[j] = platform_get_resource_byname(pdev,
>> +                                             IORESOURCE_MEM,
>>                                               res_name);
>> -             if (!r[j] || !info[j]) {
>> +             }
>> +             if (!r[j]) {
>>                       if (found)
>>                               break;
>>                       else
>> @@ -1440,7 +1575,7 @@ static int __init edma_probe(struct platform_device *pdev)
>>                                       off = rsv_chans[i][0];
>>                                       ln = rsv_chans[i][1];
>>                                       clear_bits(off, ln,
>> -                                             edma_cc[j]->edma_unused);
>> +                                               edma_cc[j]->edma_unused);
>>                               }
>>                       }
>>
>> @@ -1456,8 +1591,14 @@ static int __init edma_probe(struct platform_device *pdev)
>>                       }
>>               }
>>
>> -             sprintf(irq_name, "edma%d", j);
>> -             irq[j] = platform_get_irq_byname(pdev, irq_name);
>> +
>> +             if (node) {
>> +                     irq[j] = irq_of_parse_and_map(node, 0);
>> +             }
>> +             else {
>> +                     sprintf(irq_name, "edma%d", j);
>> +                     irq[j] = platform_get_irq_byname(pdev, irq_name);
>> +             }
>
> You ended up introducing checkpatch error here..
>
>>               edma_cc[j]->irq_res_start = irq[j];
>>               status = devm_request_irq(&pdev->dev, irq[j],
>>                                         dma_irq_handler, 0, "edma",
>> @@ -1469,8 +1610,13 @@ static int __init edma_probe(struct platform_device *pdev)
>>                       return status;
>>               }
>>
>> -             sprintf(irq_name, "edma%d_err", j);
>> -             err_irq[j] = platform_get_irq_byname(pdev, irq_name);
>> +             if (node) {
>> +                     err_irq[j] = irq_of_parse_and_map(node, 2);
>> +             }
>> +             else {
>> +                     sprintf(irq_name, "edma%d_err", j);
>> +                     err_irq[j] = platform_get_irq_byname(pdev, irq_name);
>> +             }
>
> .. and here.
>
>>               edma_cc[j]->irq_res_end = err_irq[j];
>>               status = devm_request_irq(&pdev->dev, err_irq[j],
>>                                         dma_ccerr_handler, 0,
>> @@ -1516,9 +1662,17 @@ static int __init edma_probe(struct platform_device *pdev)
>>       return 0;
>>  }
>>
>> +static const struct of_device_id edma_of_ids[] = {
>> +     { .compatible = "ti,edma3", },
>> +     {}
>> +};
>>
>>  static struct platform_driver edma_driver = {
>> -     .driver.name    = "edma",
>> +     .driver = {
>> +             .name   = "edma",
>> +             .of_match_table = edma_of_ids,
>> +     },
>> +     .probe = edma_probe,
>>  };
>>
>>  static int __init edma_init(void)
>> diff --git a/include/linux/platform_data/edma.h b/include/linux/platform_data/edma.h
>> index 2344ea2..317f2be 100644
>> --- a/include/linux/platform_data/edma.h
>> +++ b/include/linux/platform_data/edma.h
>> @@ -175,8 +175,8 @@ struct edma_soc_info {
>>       /* Resource reservation for other cores */
>>       struct edma_rsv_info    *rsv;
>>
>> -     const s8        (*queue_tc_mapping)[2];
>> -     const s8        (*queue_priority_mapping)[2];
>> +     s8      (*queue_tc_mapping)[2];
>> +     s8      (*queue_priority_mapping)[2];
>
> So the warnings/errors introduced in this patch must be fixed in this
> patch only. I merged your 07/11 into this. But that does not solve all
> the problems since you ignored non-DA8XX platforms. I fixed those.
>
> Also, Arnd acked the whole series so I added his ack to this.
>
> I have tested the updated on non-DT DM644x board. That means a large
> part of the patch is actually untested. Can you please test it and let
> me know it works? I will sent the patch as a reply to this mail.
>
> Thanks,
> Sekhar
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux