Currently, if DMA information isn't passed from platform data, then DMA
will not be used. This patch allows DMA information obtained though Device
Tree to be used as well.
Cc: Russell King <linux@xxxxxxxxxxxxxxxx>
Cc: Chris Ball <cjb@xxxxxxxxxx>
Cc: linux-mmc@xxxxxxxxxxxxxxx
Signed-off-by: Lee Jones <lee.jones@xxxxxxxxxx>
---
drivers/mmc/host/mmci.c | 43 ++++++++++++++++++++++---------------------
1 file changed, 22 insertions(+), 21 deletions(-)
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index 372e921..ecd256b 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -304,10 +304,8 @@ static void mmci_dma_setup(struct mmci_host *host)
const char *rxname, *txname;
dma_cap_mask_t mask;
- if (!plat || !plat->dma_filter) {
- dev_info(mmc_dev(host->mmc), "no DMA platform data\n");
- return;
- }
+ host->dma_rx_channel = dma_request_slave_channel(dev, "rx");
+ host->dma_tx_channel = dma_request_slave_channel(dev, "tx");
/* initialize pre request cookie */
host->next_data.cookie = 1;
@@ -316,30 +314,33 @@ static void mmci_dma_setup(struct mmci_host *host)
dma_cap_zero(mask);
dma_cap_set(DMA_SLAVE, mask);
- /*
- * If only an RX channel is specified, the driver will
- * attempt to use it bidirectionally, however if it is
- * is specified but cannot be located, DMA will be disabled.
- */
- if (plat->dma_rx_param) {
- host->dma_rx_channel = dma_request_channel(mask,
+ if (plat && plat->dma_filter) {
+ if (!host->dma_rx_channel && plat->dma_rx_param) {
+ host->dma_rx_channel = dma_request_channel(mask,
plat->dma_filter,
plat->dma_rx_param);
- /* E.g if no DMA hardware is present */
- if (!host->dma_rx_channel)
- dev_err(mmc_dev(host->mmc), "no RX DMA channel\n");
- }
+ /* E.g if no DMA hardware is present */
+ if (!host->dma_rx_channel)
+ dev_err(mmc_dev(host->mmc), "no RX DMA channel\n");
+ }
- if (plat->dma_tx_param) {
- host->dma_tx_channel = dma_request_channel(mask,
+ if (!host->dma_tx_channel && plat->dma_tx_param) {
+ host->dma_tx_channel = dma_request_channel(mask,
plat->dma_filter,
plat->dma_tx_param);
- if (!host->dma_tx_channel)
- dev_warn(mmc_dev(host->mmc), "no TX DMA channel\n");
- } else {
- host->dma_tx_channel = host->dma_rx_channel;
+ if (!host->dma_tx_channel)
+ dev_warn(mmc_dev(host->mmc), "no TX DMA channel\n");
+ }
}
+ /*
+ * If only an RX channel is specified, the driver will
+ * attempt to use it bidirectionally, however if it is
+ * is specified but cannot be located, DMA will be disabled.
+ */
+ if (host->dma_rx_channel && !host->dma_tx_channel)
+ host->dma_tx_channel = host->dma_rx_channel;
+
if (host->dma_rx_channel)
rxname = dma_chan_name(host->dma_rx_channel);
else
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
