Re: [PATCH] mmc: dw_mmc: clear INSTS register when initialize

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 04/23/2013 06:57 PM, Seungwon Jeon wrote:
> Hi,
> 
> On Thursday, April 18, 2013, Joonyoung Shim wrote:
>> If pending interrupt for IDMAC exists when probe, it will call interrupt
>> handler unnecessarily.
>>
>> Signed-off-by: Joonyoung Shim <jy0922.shim@xxxxxxxxxxx>
>> ---
>>  drivers/mmc/host/dw_mmc.c |    3 +++
>>  1 file changed, 3 insertions(+)
>>
>> diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
>> index 323c502..b0057a2 100644
>> --- a/drivers/mmc/host/dw_mmc.c
>> +++ b/drivers/mmc/host/dw_mmc.c
>> @@ -2192,6 +2192,7 @@ int dw_mci_probe(struct dw_mci *host)
>>
>>  	/* Clear the interrupts for the host controller */
>>  	mci_writel(host, RINTSTS, 0xFFFFFFFF);
>> +	mci_writel(host, IDSTS, 0xFFFFFFFF);
> 0x337 is correct for bits. Could you check the bit filed?
I think that don't care which reset value used.
"It is recommended that you write 0xffff_ffff to the Raw Interrupt register @0x044 and IDSTS @0x8C
in order to clear any pending interrupts before setting the int_enable bit."
This boot mode case is also used the 0xffff_ffff.
> 
>>  	mci_writel(host, INTMASK, 0); /* disable all mmc interrupt first */
>>
>>  	/* Put in max timeout */
>> @@ -2243,6 +2244,7 @@ int dw_mci_probe(struct dw_mci *host)
>>  	 * receive ready and error such as transmit, receive timeout, crc error
>>  	 */
>>  	mci_writel(host, RINTSTS, 0xFFFFFFFF);
>> +	mci_writel(host, IDSTS, 0xFFFFFFFF);
> No need, it's already done above.
> 
>>  	mci_writel(host, INTMASK, SDMMC_INT_CMD_DONE | SDMMC_INT_DATA_OVER |
>>  		   SDMMC_INT_TXDR | SDMMC_INT_RXDR |
>>  		   DW_MCI_ERROR_FLAGS | SDMMC_INT_CD);
>> @@ -2393,6 +2395,7 @@ int dw_mci_resume(struct dw_mci *host)
>>  	mci_writel(host, FIFOTH, host->fifoth_val);
>>
>>  	mci_writel(host, RINTSTS, 0xFFFFFFFF);
>> +	mci_writel(host, IDSTS, 0xFFFFFFFF);
> Same, incorrect bits.
> 
> Thanks,
> Seungwon Jeon
> 
>>  	mci_writel(host, INTMASK, SDMMC_INT_CMD_DONE | SDMMC_INT_DATA_OVER |
>>  		   SDMMC_INT_TXDR | SDMMC_INT_RXDR |
>>  		   DW_MCI_ERROR_FLAGS | SDMMC_INT_CD);
>> --
>> 1.7.9.5
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
>> the body of a message to majordomo@xxxxxxxxxxxxxxx
>> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux