[PATCH] mmc: core: Only execute tuning for SDR50 and SDR104

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Only execute tuning for sd and sdio devices that are using
SDR50 or SDR104.

Make sure clock is hold during tuning for sdio devices.

Signed-off-by: Fredrik Soderstedt <fredrik.soderstedt@xxxxxxxxxxxxxx>
---
 drivers/mmc/core/sd.c   |  9 +++++++--
 drivers/mmc/core/sdio.c | 12 ++++++++++--
 2 files changed, 17 insertions(+), 4 deletions(-)

diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c
index 9e645e1..8373d22 100644
--- a/drivers/mmc/core/sd.c
+++ b/drivers/mmc/core/sd.c
@@ -646,8 +646,13 @@ static int mmc_sd_init_uhs_card(struct mmc_card *card)
 	if (err)
 		goto out;
 
-	/* SPI mode doesn't define CMD19 */
-	if (!mmc_host_is_spi(card->host) && card->host->ops->execute_tuning) {
+	/*
+	 * SPI mode doesn't define CMD19 and tuning is only valid for SDR50 and
+	 * SDR104 mode SD-cards. Note that tuning is mandatory for SDR104.
+	 */
+	if (!mmc_host_is_spi(card->host) && card->host->ops->execute_tuning &&
+			(card->sd_bus_speed == UHS_SDR50_BUS_SPEED ||
+			 card->sd_bus_speed == UHS_SDR104_BUS_SPEED)) {
 		mmc_host_clk_hold(card->host);
 		err = card->host->ops->execute_tuning(card->host,
 						      MMC_SEND_TUNING_BLOCK);
diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c
index 6889a82..444668c 100644
--- a/drivers/mmc/core/sdio.c
+++ b/drivers/mmc/core/sdio.c
@@ -563,10 +563,18 @@ static int mmc_sdio_init_uhs_card(struct mmc_card *card)
 	if (err)
 		goto out;
 
-	/* Initialize and start re-tuning timer */
-	if (!mmc_host_is_spi(card->host) && card->host->ops->execute_tuning)
+	/*
+	 * SPI mode doesn't define CMD19 and tuning is only valid for SDR50 and
+	 * SDR104 mode SD-cards. Note that tuning is mandatory for SDR104.
+	 */
+	if (!mmc_host_is_spi(card->host) && card->host->ops->execute_tuning &&
+			((card->sw_caps.sd3_bus_mode & SD_MODE_UHS_SDR50) ||
+			 (card->sw_caps.sd3_bus_mode & SD_MODE_UHS_SDR104))) {
+		mmc_host_clk_hold(card->host);
 		err = card->host->ops->execute_tuning(card->host,
 						      MMC_SEND_TUNING_BLOCK);
+		mmc_host_clk_release(card->host);
+	}
 
 out:
 
-- 
1.8.2.1

--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux