On Sunday 17 March 2013, Jonas Jensen wrote: > Thank you for the feedback. > > Some of the changes are sure to be a challenge for me, but I want to > move this forward, and having a list helps. > > 3.2.40 is as far as it'll go right now, nothing prints to UART > starting with 3.3.8 (last tested, it's somewhere around there). > > I have been advised to enable early_printk (by landley on freenode IRC #edev). Yes, that is a good idea. I would also suggest that you don't try to port all the code at once a few kernel versions at a time, but that you instead move straight to the latest kernel, and basically start a new port one driver at a time. Take one of the newer ports (highbank, virt, bcm, ...) as examples. Since most of the code is now in drivers/ directories rather than arch/arm, you can actually start getting stuff upstream before you have completed all of it. If you have questions, I recommend asking on the #armlinux channel on freenode, or here on the mailing list. Arnd -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
