Re: [PATCH v2] mmc: sdhci: update check code for cd-broken or nonremovable card

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mar 1, 2013, at 9:40 AM, Kevin Liu <kliu5@xxxxxxxxxxx> wrote:

> in function sdhci_request:
> 1. If quirk SDHCI_QUIRK_BROKEN_CARD_DETECTION is selected, there is no
> card detection available and polling must be used. Gpio detect must
> _not_ be supported under this case.
> Change the sequence to check SDHCI_QUIRK_BROKEN_CARD_DETECTION first,
> which make code more clear.
> 2. nonremovable card should be also assumed always present.
> 
> in function sdhci_enable_irq_wakeups:
> 1. nonremovable card should be also assumed no insert/remove wakeup
> needed like some sdio cards which is nonremovable and can wakeup host
> only by card int.
> 
> Signed-off-by: Kevin Liu <kliu5@xxxxxxxxxxx>
> ---
> drivers/mmc/host/sdhci.c |   30 ++++++++++++++++--------------
> 1 file changed, 16 insertions(+), 14 deletions(-)
> 
> diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
> index c94fd6c..e4ada0d 100644
> --- a/drivers/mmc/host/sdhci.c
> +++ b/drivers/mmc/host/sdhci.c
> @@ -1337,19 +1337,20 @@ static void sdhci_request(struct mmc_host *mmc, struct mmc_request *mrq)
> 
> 	host->mrq = mrq;
> 
> -	/*
> -	 * Firstly check card presence from cd-gpio.  The return could
> -	 * be one of the following possibilities:
> -	 *     negative: cd-gpio is not available
> -	 *     zero: cd-gpio is used, and card is removed
> -	 *     one: cd-gpio is used, and card is present
> -	 */
> -	present = mmc_gpio_get_cd(host->mmc);
> -	if (present < 0) {
> -		/* If polling, assume that the card is always present. */
> -		if (host->quirks & SDHCI_QUIRK_BROKEN_CARD_DETECTION)
> -			present = 1;
> -		else
> +	/* If polling/nonremovable, assume that the card is always present. */
> +	if ((host->quirks & SDHCI_QUIRK_BROKEN_CARD_DETECTION) ||
> +			(host->mmc->caps & MMC_CAP_NONREMOVABLE)) {
> +		present = 1;
> +	} else {
> +		/*
> +		 * Firstly check card presence from cd-gpio.  The return could
> +		 * be one of the following possibilities:
> +		 *     negative: cd-gpio is not available
> +		 *     zero: cd-gpio is used, and card is removed
> +		 *     one: cd-gpio is used, and card is present
> +		 */
> +		present = mmc_gpio_get_cd(host->mmc);
> +		if (IS_ERR_VALUE(present))
> 			present = sdhci_readl(host, SDHCI_PRESENT_STATE) &
> 					SDHCI_CARD_PRESENT;

Hi Kevin

does it make sense to move this logic to a more generic function (static inline ?)
int sdhci_card_present ()

and encapsulate all the logic there for gpio cd, present state (card is there) etc.

Philip

> 	}
> @@ -2504,7 +2505,8 @@ void sdhci_enable_irq_wakeups(struct sdhci_host *host)
> 	val = sdhci_readb(host, SDHCI_WAKE_UP_CONTROL);
> 	val |= mask ;
> 	/* Avoid fake wake up */
> -	if (host->quirks & SDHCI_QUIRK_BROKEN_CARD_DETECTION)
> +	if ((host->quirks & SDHCI_QUIRK_BROKEN_CARD_DETECTION) ||
> +			(host->mmc->caps & MMC_CAP_NONREMOVABLE))
> 		val &= ~(SDHCI_WAKE_ON_INSERT | SDHCI_WAKE_ON_REMOVE);
> 	sdhci_writeb(host, val, SDHCI_WAKE_UP_CONTROL);
> }
> -- 
> 1.7.9.5
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux