In the legacy code, driver clear not only UHS_REG 16 bit also 0-15bit. If we use UHS-1 mode spec card like SDR50, SDR104. UHS_REG 0-15 should be set by 1 according to slot id. In this case, legacy code can make problem. Signed-off-by: Hyeonsu Kim <hyeonsu.kim@xxxxxxxxxxx> --- drivers/mmc/host/dw_mmc.c | 4 ++-- 1 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c index 323c502..390c15c 100644 --- a/drivers/mmc/host/dw_mmc.c +++ b/drivers/mmc/host/dw_mmc.c @@ -789,9 +789,9 @@ static void dw_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) /* DDR mode set */ if (ios->timing == MMC_TIMING_UHS_DDR50) - regs |= (0x1 << slot->id) << 16; + regs |= ((0x1 << slot->id) << 16); else - regs &= ~(0x1 << slot->id) << 16; + regs &= ~((0x1 << slot->id) << 16); mci_writel(slot->host, UHS_REG, regs); -- 1.7.5.4 -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
