The mmc controller on Tegra114 platforms is basically compatible with
the settings used for Tegra30. However there is a difference where we
don't need the extra ENABLE_SDHCI_SPEC_300 quirk as Tegra114 hardware
advertises v3.0 support already.
Signed-off-by: Rhyland Klein <rklein@xxxxxxxxxx>
---
drivers/mmc/host/sdhci-tegra.c | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/drivers/mmc/host/sdhci-tegra.c b/drivers/mmc/host/sdhci-tegra.c
index 5e126bf..931d9d7 100644
--- a/drivers/mmc/host/sdhci-tegra.c
+++ b/drivers/mmc/host/sdhci-tegra.c
@@ -201,7 +201,21 @@ static struct sdhci_tegra_soc_data soc_data_tegra30 = {
.nvquirks = NVQUIRK_ENABLE_SDHCI_SPEC_300,
};
+static struct sdhci_pltfm_data sdhci_tegra114_pdata = {
+ .quirks = SDHCI_QUIRK_BROKEN_TIMEOUT_VAL |
+ SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK |
+ SDHCI_QUIRK_SINGLE_POWER_WRITE |
+ SDHCI_QUIRK_NO_HISPD_BIT |
+ SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC,
+ .ops = &tegra_sdhci_ops,
+};
+
+static struct sdhci_tegra_soc_data soc_data_tegra114 = {
+ .pdata = &sdhci_tegra114_pdata,
+};
+
static const struct of_device_id sdhci_tegra_dt_match[] = {
+ { .compatible = "nvidia,tegra114-sdhci", .data = &soc_data_tegra114 },
{ .compatible = "nvidia,tegra30-sdhci", .data = &soc_data_tegra30 },
{ .compatible = "nvidia,tegra20-sdhci", .data = &soc_data_tegra20 },
{}
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
