On Mon, 21 Jan 2013 19:02:29 +0800, Shawn Guo <shawn.guo@xxxxxxxxxx> wrote: > None of mmc drivers implements bus-width as a required device tree > property. Instead, some drivers like atmel-mci, dw_mmc, sdhci-s3c > implement it as an optional one, and will force bus width to be 1 > when the property is absent. Let's change the common binding to > reflect what the drivers are usually doing. > > Signed-off-by: Shawn Guo <shawn.guo@xxxxxxxxxx> > Cc: devicetree-discuss@xxxxxxxxxxxxxxxx Acked-by: Grant Likely <grant.likely@xxxxxxxxxxxx> > --- > Documentation/devicetree/bindings/mmc/mmc.txt | 5 ++--- > 1 file changed, 2 insertions(+), 3 deletions(-) > > diff --git a/Documentation/devicetree/bindings/mmc/mmc.txt b/Documentation/devicetree/bindings/mmc/mmc.txt > index a591c67..cef217d 100644 > --- a/Documentation/devicetree/bindings/mmc/mmc.txt > +++ b/Documentation/devicetree/bindings/mmc/mmc.txt > @@ -6,9 +6,6 @@ Interpreted by the OF core: > - reg: Registers location and length. > - interrupts: Interrupts used by the MMC controller. > > -Required properties: > -- bus-width: Number of data lines, can be <1>, <4>, or <8> > - > Card detection: > If no property below is supplied, standard SDHCI card detect is used. > Only one of the properties in this section should be supplied: > @@ -17,6 +14,8 @@ Only one of the properties in this section should be supplied: > - non-removable: non-removable slot (like eMMC); assume always present. > > Optional properties: > +- bus-width: Number of data lines, can be <1>, <4>, or <8>. The default > + will be <1> if the property is absent. > - wp-gpios: Specify GPIOs for write protection, see gpio binding > - cd-inverted: when present, polarity on the cd gpio line is inverted > - wp-inverted: when present, polarity on the wp gpio line is inverted > -- > 1.7.9.5 > > > _______________________________________________ > devicetree-discuss mailing list > devicetree-discuss@xxxxxxxxxxxxxxxx > https://lists.ozlabs.org/listinfo/devicetree-discuss -- Grant Likely, B.Sc, P.Eng. Secret Lab Technologies, Ltd. -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
