Hello,
On 12/4/2012 3:01 PM, Marek Szyprowski wrote:
Some regulators don't report any voltage values, so checking supported
voltage range results in disabling all SDHCI_CAN_VDD_* flags and
registration failure. This patch finally provides a correct fix for the
registration of SDHCI driver with all possible voltage regulators:
dummy, fixed and regulated without using regulator_count_voltages()
hacks.
Signed-off-by: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
Any chance to get this patch scheduled for v3.9?
---
drivers/mmc/host/sdhci.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index a9ad2cd..d244dc0 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -2930,7 +2930,11 @@ int sdhci_add_host(struct sdhci_host *host)
}
#ifdef CONFIG_REGULATOR
- if (host->vmmc && regulator_count_voltages(host->vmmc) > 1) {
+ /*
+ * Voltage range check makes sense only if regulator reports
+ * any voltage value.
+ */
+ if (host->vmmc && regulator_get_voltage(host->vmmc) > 0) {
ret = regulator_is_supported_voltage(host->vmmc, 2700000,
3600000);
if ((ret <= 0) || (!(caps[0] & SDHCI_CAN_VDD_330)))
Best regards
--
Marek Szyprowski
Samsung Poland R&D Center
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
