Many MMC capability flags are platform-dependent and are traditionally set in platform data. With DT often each such capability requires a special binding. Add bindings for MMC_CAP_SD_HIGHSPEED, MMC_CAP_MMC_HIGHSPEED and MMC_CAP_POWER_OFF_CARD capabilities. Also add code to DT parser to look up "keep-power-in-suspend" and "enable-sdio-wakeup" bindings and set MMC_PM_KEEP_POWER and MMC_PM_WAKE_SDIO_IRQ respectively, if found. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@xxxxxx> --- Attention: contains new DT bindings, please, comment! Documentation/devicetree/bindings/mmc/mmc.txt | 5 ++++- drivers/mmc/core/host.c | 11 +++++++++++ 2 files changed, 15 insertions(+), 1 deletions(-) diff --git a/Documentation/devicetree/bindings/mmc/mmc.txt b/Documentation/devicetree/bindings/mmc/mmc.txt index e180892..92ec534c 100644 --- a/Documentation/devicetree/bindings/mmc/mmc.txt +++ b/Documentation/devicetree/bindings/mmc/mmc.txt @@ -25,8 +25,11 @@ Optional properties: - max-frequency: maximum operating clock frequency - no-1-8-v: when present, denotes that 1.8v card voltage is not supported on this system, even if the controller claims it is. +- cap-sd-highspeed: SD high-speed timing is supported +- cap-mmc-highspeed: MMC high-speed timing is supported +- cap-power-off-card: powering off the card is safe -cd-inverted and wp-inverted properties are deprecated ans shouldn't be used, +cd-inverted and wp-inverted properties are deprecated and shouldn't be used, instead pleaseuse the OF_GPIO_ACTIVE_LOW flag in respective GPIO bindings. Note, that the default (as defined by the SDHCI standard) CD and WP polarity is active-low, so, OF_GPIO_ACTIVE_LOW should normally be set, and only be left diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c index e4c1cbd..f3ea268 100644 --- a/drivers/mmc/core/host.c +++ b/drivers/mmc/core/host.c @@ -372,6 +372,17 @@ void mmc_of_parse(struct mmc_host *host) dev_err(host->parent, "Failed to request WP GPIO: %d!\n", ret); } + + if (of_find_property(np, "cap-sd-highspeed", &len)) + host->caps |= MMC_CAP_SD_HIGHSPEED; + if (of_find_property(np, "cap-mmc-highspeed", &len)) + host->caps |= MMC_CAP_MMC_HIGHSPEED; + if (of_find_property(np, "cap-power-off-card", &len)) + host->caps |= MMC_CAP_POWER_OFF_CARD; + if (of_find_property(np, "keep-power-in-suspend", &len)) + host->pm_caps |= MMC_PM_KEEP_POWER; + if (of_find_property(np, "enable-sdio-wakeup", &len)) + host->pm_caps |= MMC_PM_WAKE_SDIO_IRQ; } EXPORT_SYMBOL(mmc_of_parse); -- 1.7.2.5 -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
