From: Johan Rudholm <johan.rudholm@xxxxxxxxxxxxxx>
In the ST Micro variant, the MMCICLOCK register must not be used to
gate the clock. Instead use MMCIPOWER register and by clearing the
PWR_ON bit to do this.
Signed-off-by: Johan Rudholm <johan.rudholm@xxxxxxxxxxxxxx>
Signed-off-by: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
---
This patch is affecting the ux500 variants only.
It is uncertain whether this new variant data for gating the clock should be
enabled for the nomadik and u300 variant as well. We should sort that out
before merging with this patch.
---
drivers/mmc/host/mmci.c | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index 1507723..e3b191f 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -59,6 +59,7 @@ static unsigned int fmax = 515633;
* @blksz_datactrl16: true if Block size is at b16..b30 position in datactrl register
* @pwrreg_powerup: power up value for MMCIPOWER register
* @signal_direction: input/out direction of bus signals can be indicated
+ * @pwrreg_clkgate: MMCIPOWER register must be used to gate the clock
*/
struct variant_data {
unsigned int clkreg;
@@ -71,6 +72,7 @@ struct variant_data {
bool blksz_datactrl16;
u32 pwrreg_powerup;
bool signal_direction;
+ bool pwrreg_clkgate;
};
static struct variant_data variant_arm = {
@@ -118,6 +120,7 @@ static struct variant_data variant_ux500 = {
.st_clkdiv = true,
.pwrreg_powerup = MCI_PWR_ON,
.signal_direction = true,
+ .pwrreg_clkgate = true,
};
static struct variant_data variant_ux500v2 = {
@@ -131,6 +134,7 @@ static struct variant_data variant_ux500v2 = {
.blksz_datactrl16 = true,
.pwrreg_powerup = MCI_PWR_ON,
.signal_direction = true,
+ .pwrreg_clkgate = true,
};
/*
@@ -1154,6 +1158,13 @@ static void mmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
}
}
+ /*
+ * If clock = 0 and the variant requires the MMCIPOWER to be used for
+ * gating the clock, the MCI_PWR_ON bit is cleared.
+ */
+ if (!ios->clock && variant->pwrreg_clkgate)
+ pwr &= ~MCI_PWR_ON;
+
spin_lock_irqsave(&host->lock, flags);
mmci_set_clkreg(host, ios->clock);
--
1.7.10
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
