In drivers/mmc/host/vub300.c::vub300_probe() we need both 'command_out_urb' and 'command_res_urb'. Currently we fail to free the former if allocating the latter fails. Fix that and simplify the code a bit at the same time by just doing both allocations and if either fails then free both - usb_free_urb() deals gracefully with NULL pointers, so this is safe. We also initialize 'retval' to '-ENOMEM' when we declare the variable, so there's no reason to re-set it to '-ENOMEM' before jumping to 'error0:' when one of the initial usb_alloc_urb() calls fail(). Also rename the 'error[0145]:' labels to be just 'error0' and 'error1'. Signed-off-by: Jesper Juhl <jj@xxxxxxxxxxxxx> --- drivers/mmc/host/vub300.c | 29 +++++++++++------------------ 1 files changed, 11 insertions(+), 18 deletions(-) This is a resend. I originally submitted this back in January: http://lkml.indiana.edu/hypermail/linux/kernel/1201.3/00305.html but got no response. Note: I have no real way to actually test this patch, so it is compile tested only. Please review carefully before applying. Also please keep me on Cc: when replying. diff --git a/drivers/mmc/host/vub300.c b/drivers/mmc/host/vub300.c index cb9f361..3f59fe1 100644 --- a/drivers/mmc/host/vub300.c +++ b/drivers/mmc/host/vub300.c @@ -2116,23 +2116,18 @@ static int vub300_probe(struct usb_interface *interface, udev->descriptor.idVendor, udev->descriptor.idProduct, manufacturer, product, serial_number); command_out_urb = usb_alloc_urb(0, GFP_KERNEL); - if (!command_out_urb) { - retval = -ENOMEM; - dev_err(&udev->dev, "not enough memory for command_out_urb\n"); - goto error0; - } command_res_urb = usb_alloc_urb(0, GFP_KERNEL); - if (!command_res_urb) { + if (!command_res_urb || !command_out_urb) { retval = -ENOMEM; - dev_err(&udev->dev, "not enough memory for command_res_urb\n"); - goto error1; + dev_err(&udev->dev, "not enough memory for command urbs\n"); + goto error0; } /* this also allocates memory for our VUB300 mmc host device */ mmc = mmc_alloc_host(sizeof(struct vub300_mmc_host), &udev->dev); if (!mmc) { retval = -ENOMEM; dev_err(&udev->dev, "not enough memory for the mmc_host\n"); - goto error4; + goto error0; } /* MMC core transfer sizes tunable parameters */ mmc->caps = 0; @@ -2285,7 +2280,7 @@ static int vub300_probe(struct usb_interface *interface, dev_err(&vub300->udev->dev, "Could not find two sets of bulk-in/out endpoint pairs\n"); retval = -EINVAL; - goto error5; + goto error1; } retval = usb_control_msg(vub300->udev, usb_rcvctrlpipe(vub300->udev, 0), @@ -2294,14 +2289,14 @@ static int vub300_probe(struct usb_interface *interface, 0x0000, 0x0000, &vub300->hc_info, sizeof(vub300->hc_info), HZ); if (retval < 0) - goto error5; + goto error1; retval = usb_control_msg(vub300->udev, usb_rcvctrlpipe(vub300->udev, 0), SET_ROM_WAIT_STATES, USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, firmware_rom_wait_states, 0x0000, NULL, 0, HZ); if (retval < 0) - goto error5; + goto error1; dev_info(&vub300->udev->dev, "operating_mode = %s %s %d MHz %s %d byte USB packets\n", (mmc->caps & MMC_CAP_SDIO_IRQ) ? "IRQs" : "POLL", @@ -2316,14 +2311,14 @@ static int vub300_probe(struct usb_interface *interface, 0x0000, 0x0000, &vub300->system_port_status, sizeof(vub300->system_port_status), HZ); if (retval < 0) { - goto error4; + goto error0; } else if (sizeof(vub300->system_port_status) == retval) { vub300->card_present = (0x0001 & vub300->system_port_status.port_flags) ? 1 : 0; vub300->read_only = (0x0010 & vub300->system_port_status.port_flags) ? 1 : 0; } else { - goto error4; + goto error0; } usb_set_intfdata(interface, vub300); INIT_DELAYED_WORK(&vub300->pollwork, vub300_pollwork_thread); @@ -2351,17 +2346,15 @@ static int vub300_probe(struct usb_interface *interface, interface_to_InterfaceNumber(interface)); mmc_add_host(mmc); return 0; -error5: +error1: mmc_free_host(mmc); /* * and hence also frees vub300 * which is contained at the end of struct mmc */ -error4: +error0: usb_free_urb(command_res_urb); -error1: usb_free_urb(command_out_urb); -error0: usb_put_dev(udev); return retval; } -- 1.7.1 -- Jesper Juhl <jj@xxxxxxxxxxxxx> http://www.chaosbits.net/ Don't top-post http://www.catb.org/jargon/html/T/top-post.html Plain text mails only, please. -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
