After power-on, must be ensured at least 74~80 clocks before sending any first command.
To ensure, it's good that dw_mci_setup_bus() is located at dw_mci_set_ios
instead of __dw_mci_start_request()
Signed-off-by: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
Signed-off-by: Kyungmin Park <kyungmin.park@xxxxxxxxxxx>
Acked-by: Seungwon Jeon <tgih.jun@xxxxxxxxxxx>
------
Changelog V2:
- Modified the commit-message.
---
drivers/mmc/host/dw_mmc.c | 6 +++---
1 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
index 4b2bedc..de79093 100644
--- a/drivers/mmc/host/dw_mmc.c
+++ b/drivers/mmc/host/dw_mmc.c
@@ -682,9 +682,6 @@ static void __dw_mci_start_request(struct dw_mci *host,
if (host->pdata->select_slot)
host->pdata->select_slot(slot->id);
- /* Slot specific timing and width adjustment */
- dw_mci_setup_bus(slot);
-
host->cur_slot = slot;
host->mrq = mrq;
@@ -810,6 +807,9 @@ static void dw_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
if (slot->host->drv_data->set_ios)
slot->host->drv_data->set_ios(slot->host, ios);
+ /* Slot specific timing and width adjustment */
+ dw_mci_setup_bus(slot);
+
switch (ios->power_mode) {
case MMC_POWER_UP:
set_bit(DW_MMC_CARD_NEED_INIT, &slot->flags);
--
1.7.4.1
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
