From: Kevin Liu <kliu5@xxxxxxxxxxx>
Some soc/platform need specific handling for signal voltage
switch. For example, mmp2/mmp3 need to set the AIB IO domain
control register accordingly.
Signed-off-by: Bin Wang <binw@xxxxxxxxxxx>
Signed-off-by: Philip Rakity <prakity@xxxxxxxxxxx>
Signed-off-by: Kevin Liu <kliu5@xxxxxxxxxxx>
---
drivers/mmc/host/sdhci.c | 17 +++++++++++++++++
drivers/mmc/host/sdhci.h | 1 +
2 files changed, 18 insertions(+), 0 deletions(-)
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index a662640..c3e786d 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -1684,6 +1684,15 @@ static int sdhci_do_3_3v_signal_voltage_switch(struct sdhci_host *host,
return -EIO;
}
}
+
+ /*
+ * May need to apply soc/platfrom settings for the
+ * voltage switch
+ */
+ if (host->ops->signal_voltage_switch)
+ host->ops->signal_voltage_switch(host,
+ host->mmc->ios.signal_voltage);
+
/* Wait for 5ms */
usleep_range(5000, 5500);
@@ -1726,6 +1735,14 @@ static int sdhci_do_1_8v_signal_voltage_switch(struct sdhci_host *host,
ret = 0;
if (!ret) {
+ /*
+ * May need to apply soc/platfrom settings for the
+ * voltage switch
+ */
+ if (host->ops->signal_voltage_switch)
+ host->ops->signal_voltage_switch(host,
+ host->mmc->ios.signal_voltage);
+
ctrl |= SDHCI_CTRL_VDD_180;
sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2);
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index 5eb27bf..5f20d32 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -290,6 +290,7 @@ struct sdhci_ops {
void (*hw_reset)(struct sdhci_host *host);
void (*platform_suspend)(struct sdhci_host *host);
void (*platform_resume)(struct sdhci_host *host);
+ void (*signal_voltage_switch)(struct sdhci_host *host, u8 vol);
};
#ifdef CONFIG_MMC_SDHCI_IO_ACCESSORS
--
1.7.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
