Hi, Am Freitag, 14. September 2012, 11:08:51 schrieb Chander Kashyap: > Perform clock disable/enable in runtime suspend/resume. > > Signed-off-by: Chander Kashyap <chander.kashyap@xxxxxxxxxx> It seems this patch breaks my S3C2416 based machine with 3.7-rc1. I'm not yet sure why, but the only response I get is loop of: mmc0: Timeout waiting for hardware interrupt. mmc0: Internal clock never stabilised. mmc0: Timeout waiting for hardware interrupt. mmc0: Internal clock never stabilised. This only happens on the hsmmc channel using the gpio-based card detect and even prevents the card from beeing fully detected. The other hsmmc channel using a permanent emmc seems to be working fine. And of course, when I revert this patch everything works fine again. I'll investigate further, but it'd be also ok if someone has a fix for this before me :-) . Heiko -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
