From: Kevin Liu <kliu5@xxxxxxxxxxx>
Enable the quirk SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN since
SD_CAPABILITIES_1[15:8](BASE_FREQ) can't get correct base
clock value. It return a fixed pre-set value like 200 on
some sdhci-pxav3 based platforms like MMP3 while return 0
on the other sdhci-pxav3 based platforms.
So we enable the quirk and get the base clock via function
get_max_clock.
Also add get_max_clock.
Reported-by: Philip Rakity <prakity@xxxxxxxxxxx>
Reviewed-by: Philip Rakity <prakity@xxxxxxxxxxx>
Signed-off-by: Kevin Liu <kliu5@xxxxxxxxxxx>
---
drivers/mmc/host/sdhci-pxav3.c | 11 ++++++++++-
1 files changed, 10 insertions(+), 1 deletions(-)
diff --git a/drivers/mmc/host/sdhci-pxav3.c b/drivers/mmc/host/sdhci-pxav3.c
index e918a2b..ccd1906 100644
--- a/drivers/mmc/host/sdhci-pxav3.c
+++ b/drivers/mmc/host/sdhci-pxav3.c
@@ -163,10 +163,18 @@ static int pxav3_set_uhs_signaling(struct sdhci_host *host, unsigned int uhs)
return 0;
}
+static u32 pxav3_get_max_clock(struct sdhci_host *host)
+{
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+
+ return clk_get_rate(pltfm_host->clk);
+}
+
static struct sdhci_ops pxav3_sdhci_ops = {
.platform_reset_exit = pxav3_set_private_registers,
.set_uhs_signaling = pxav3_set_uhs_signaling,
.platform_send_init_74_clocks = pxav3_gen_init_74_clocks,
+ .get_max_clock = pxav3_get_max_clock,
};
#ifdef CONFIG_OF
@@ -249,7 +257,8 @@ static int __devinit sdhci_pxav3_probe(struct platform_device *pdev)
host->quirks = SDHCI_QUIRK_BROKEN_TIMEOUT_VAL
| SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC
- | SDHCI_QUIRK_32BIT_ADMA_SIZE;
+ | SDHCI_QUIRK_32BIT_ADMA_SIZE
+ | SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN;
/* enable 1/8V DDR capable */
host->mmc->caps |= MMC_CAP_1_8V_DDR;
--
1.7.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
