On Sep 24, 2012, at 1:15 AM, Kevin Liu <keyuan.liu@xxxxxxxxx> wrote: > From: Kevin Liu <kliu5@xxxxxxxxxxx> > > Enable the quirk SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN since > SD_CAPABILITIES_1[15:8](BASE_FREQ) can't get correct base > clock value. It return a fixed pre-set value like 200 on > some sdhci-pxav3 based platforms like MMP3 while return 0 > on the other sdhci-pxav3 based platforms. > So we enable the quirk and get the base clock via function > get_max_clock. > > Signed-off-by: Kevin Liu <kliu5@xxxxxxxxxxx> > --- > drivers/mmc/host/sdhci-pxav3.c | 3 ++- > 1 files changed, 2 insertions(+), 1 deletions(-) > > diff --git a/drivers/mmc/host/sdhci-pxav3.c b/drivers/mmc/host/sdhci-pxav3.c > index e918a2b..75cc79b 100644 > --- a/drivers/mmc/host/sdhci-pxav3.c > +++ b/drivers/mmc/host/sdhci-pxav3.c > @@ -249,7 +249,8 @@ static int __devinit sdhci_pxav3_probe(struct platform_device *pdev) > > host->quirks = SDHCI_QUIRK_BROKEN_TIMEOUT_VAL > | SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC > - | SDHCI_QUIRK_32BIT_ADMA_SIZE; > + | SDHCI_QUIRK_32BIT_ADMA_SIZE > + | SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN; > > /* enable 1/8V DDR capable */ > host->mmc->caps |= MMC_CAP_1_8V_DDR; > -- > 1.7.0.4 > Kevin, would you mind adding: Reported-by: Philip Rakity <prakity@xxxxxxxxxxx> since I originally sent you different code to fix this. This patch is NOT sufficient to fix the problem since the clock code was not correct in the marvell mmp3 code. Has someone sent upstream the patch to fix the base code in linux ? Reviewed-by: Philip Rakity <prakity@xxxxxxxxxxx>-- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
