Hi Shawn, On Mon, Sep 17, 2012 at 01:34:29PM +0800, Shawn Guo wrote: > The series enables multi-platform support for imx. Since the required > frameworks (clk, pwm) and spare_irq have already been adopted on imx, > the series is all about cleaning up mach/* headers. Along with the > changes, arch/arm/plat-mxc gets merged into arch/arm/mach-imx. > > It's based on a bunch of branches (works from others), Rob's initial > multi-platform series, Arnd's platform-data and smp_ops (Marc's) and > imx 3.7 material (Sascha and myself). > > It's available on branch below. > > git://git.linaro.org/people/shawnguo/linux-2.6.git imx/multi-platform > > It's been tested on imx5 and imx6, and only compile-tested on imx2 and > imx3, so testing on imx2/3 are appreciated. Great work! This really pushes the i.MX architecture one step closer to a clean code base. I gave it a test on i.MX1, i.MX27, i.MX31 and i.MX35. All run fine, but the last patch breaks the imx_v4_v5_defconfig: Somehow it now defaults to ARMv7 based machines. I haven't looked into it, just reenabled ARMv4/ARMv5 and the boards again -> works. The config should be updated with the last patch. I'm fine with the changes to mx2-camera, but Javier should give his ok to it, he has worked on it quite a lot recently. One other issue related to imx-dma, see comment to that patch. Otherwise: Acked-by: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx> Tested-by: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx> Thanks Sascha -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
