Re: [PATCH 1/3] mmc: sdhci-s3c: Enable only required bus clock

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



looks good
Reviewed by: Girish KS <girish.shivananjappa@xxxxxxxxxx>

On 14 September 2012 14:38, Chander Kashyap <chander.kashyap@xxxxxxxxxx> wrote:
> In case of multiple bus clock sources, all the clock sources were
> getting enabled. As only one clock source is needed at the time hence
> enable only the required bus clock.
>
> This patch does as follows:
> 1.      In sdhci_s3c_probe enable only required bus clock source.
>
> 2.      Handle the disabling of old bus clock and enables the
>         best clock selected in sdhci_s3c_set_clock().
>
> Signed-off-by: Chander Kashyap <chander.kashyap@xxxxxxxxxx>
> ---
>  drivers/mmc/host/sdhci-s3c.c |   12 +++++++-----
>  1 file changed, 7 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/mmc/host/sdhci-s3c.c b/drivers/mmc/host/sdhci-s3c.c
> index 00969ba..0cbb4c2 100644
> --- a/drivers/mmc/host/sdhci-s3c.c
> +++ b/drivers/mmc/host/sdhci-s3c.c
> @@ -203,10 +203,12 @@ static void sdhci_s3c_set_clock(struct sdhci_host *host, unsigned int clock)
>                  best_src, clock, best);
>
>         /* select the new clock source */
> -
>         if (ourhost->cur_clk != best_src) {
>                 struct clk *clk = ourhost->clk_bus[best_src];
>
> +               clk_enable(clk);
> +               clk_disable(ourhost->clk_bus[ourhost->cur_clk]);
> +
>                 /* turn clock off to card before changing clock source */
>                 writew(0, host->ioaddr + SDHCI_CLOCK_CONTROL);
>
> @@ -501,8 +503,6 @@ static int __devinit sdhci_s3c_probe(struct platform_device *pdev)
>                  */
>                 sc->cur_clk = ptr;
>
> -               clk_enable(clk);
> -
>                 dev_info(dev, "clock source %d: %s (%ld Hz)\n",
>                          ptr, name, clk_get_rate(clk));
>         }
> @@ -513,6 +513,8 @@ static int __devinit sdhci_s3c_probe(struct platform_device *pdev)
>                 goto err_no_busclks;
>         }
>
> +       clk_enable(sc->clk_bus[sc->cur_clk]);
> +
>         res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>         host->ioaddr = devm_request_and_ioremap(&pdev->dev, res);
>         if (!host->ioaddr) {
> @@ -621,9 +623,9 @@ static int __devinit sdhci_s3c_probe(struct platform_device *pdev)
>         return 0;
>
>   err_req_regs:
> +       clk_disable(sc->clk_bus[sc->cur_clk]);
>         for (ptr = 0; ptr < MAX_BUS_CLK; ptr++) {
>                 if (sc->clk_bus[ptr]) {
> -                       clk_disable(sc->clk_bus[ptr]);
>                         clk_put(sc->clk_bus[ptr]);
>                 }
>         }
> @@ -658,9 +660,9 @@ static int __devexit sdhci_s3c_remove(struct platform_device *pdev)
>
>         pm_runtime_disable(&pdev->dev);
>
> +       clk_disable(sc->clk_bus[sc->cur_clk]);
>         for (ptr = 0; ptr < 3; ptr++) {
>                 if (sc->clk_bus[ptr]) {
> -                       clk_disable(sc->clk_bus[ptr]);
>                         clk_put(sc->clk_bus[ptr]);
>                 }
>         }
> --
> 1.7.9.5
>
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux