From: Kevin Liu <kliu5@xxxxxxxxxxx>
Use voltage range as below rather than a specific value
3.3v: (3.2v, 3.4v)
3.0v: (2.9v, 3.1v)
1.8v: (1.65v, 1.95v)
Signed-off-by: Jialing Fu <jlfu@xxxxxxxxxxx>
Signed-off-by: Kevin Liu <kliu5@xxxxxxxxxxx>
---
drivers/mmc/host/sdhci.c | 18 +++++++++---------
1 files changed, 9 insertions(+), 9 deletions(-)
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 962f696..08dae93 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -1632,7 +1632,7 @@ static int sdhci_do_3_3v_signal_voltage_switch(struct sdhci_host *host,
sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2);
if (host->vqmmc) {
- ret = regulator_set_voltage(host->vqmmc, 3300000, 3300000);
+ ret = regulator_set_voltage(host->vqmmc, 3200000, 3400000);
if (ret) {
pr_warning("%s: Switching to 3.3V signalling voltage "
" failed\n", mmc_hostname(host->mmc));
@@ -1676,7 +1676,7 @@ static int sdhci_do_1_8v_signal_voltage_switch(struct sdhci_host *host,
*/
if (host->vqmmc)
ret = regulator_set_voltage(host->vqmmc,
- 1800000, 1800000);
+ 1650000, 1950000);
else
ret = 0;
@@ -2860,7 +2860,7 @@ int sdhci_add_host(struct sdhci_host *host)
pr_info("%s: no vqmmc regulator found\n", mmc_hostname(mmc));
host->vqmmc = NULL;
}
- else if (regulator_is_supported_voltage(host->vqmmc, 1800000, 1800000))
+ else if (regulator_is_supported_voltage(host->vqmmc, 1650000, 1950000))
regulator_enable(host->vqmmc);
else
caps[1] &= ~(SDHCI_SUPPORT_SDR104 | SDHCI_SUPPORT_SDR50 |
@@ -2935,16 +2935,16 @@ int sdhci_add_host(struct sdhci_host *host)
#ifdef CONFIG_REGULATOR
if (host->vmmc) {
- ret = regulator_is_supported_voltage(host->vmmc, 3300000,
- 3300000);
+ ret = regulator_is_supported_voltage(host->vmmc, 3200000,
+ 3400000);
if ((ret <= 0) || (!(caps[0] & SDHCI_CAN_VDD_330)))
caps[0] &= ~SDHCI_CAN_VDD_330;
- ret = regulator_is_supported_voltage(host->vmmc, 3000000,
- 3000000);
+ ret = regulator_is_supported_voltage(host->vmmc, 2900000,
+ 3100000);
if ((ret <= 0) || (!(caps[0] & SDHCI_CAN_VDD_300)))
caps[0] &= ~SDHCI_CAN_VDD_300;
- ret = regulator_is_supported_voltage(host->vmmc, 1800000,
- 1800000);
+ ret = regulator_is_supported_voltage(host->vmmc, 1650000,
+ 1950000);
if ((ret <= 0) || (!(caps[0] & SDHCI_CAN_VDD_180)))
caps[0] &= ~SDHCI_CAN_VDD_180;
}
--
1.7.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
