Hi,
On 28/08/12 08:55, Jaehoon Chung wrote:
> Some SoC need to set the clock-phase shift.
> So Add the callback function into platdata for using phase-shift
>
> Signed-off-by: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
> Signed-off-by: Kyungmin Park <kyungmin.park@xxxxxxxxxxx>
> ---
> drivers/mmc/host/dw_mmc.c | 3 +++
> include/linux/mmc/dw_mmc.h | 8 ++++++++
> 2 files changed, 11 insertions(+), 0 deletions(-)
>
> diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
> index e30d3ed..437fdf8 100644
> --- a/drivers/mmc/host/dw_mmc.c
> +++ b/drivers/mmc/host/dw_mmc.c
> @@ -821,6 +821,9 @@ static void dw_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
>
> mci_writel(slot->host, UHS_REG, regs);
>
> + if (slot->host->pdata->set_clk_drv_sample)
> + slot->host->pdata->set_clk_drv_sample(slot->host, ios);
> +
> if (ios->clock) {
> /*
> * Use mirror of ios->clock to prevent race with mmc
> diff --git a/include/linux/mmc/dw_mmc.h b/include/linux/mmc/dw_mmc.h
> index 7a7ebd3..f20979c 100644
> --- a/include/linux/mmc/dw_mmc.h
> +++ b/include/linux/mmc/dw_mmc.h
> @@ -229,6 +229,9 @@ struct dw_mci_board {
> */
> unsigned int fifo_depth;
>
> + u32 ddr_timing; /* DDR clock phase timing value */
> + u32 sdr_timing; /* SDR clock phase timing value */
> +
These don't appear to be used. Are they meant to be there?
> /* delay in mS before detecting cards after interrupt */
> u32 detect_delay_ms;
>
> @@ -249,6 +252,11 @@ struct dw_mci_board {
> struct dw_mci_dma_ops *dma_ops;
> struct dma_pdata *data;
> struct block_settings *blk_settings;
> +
> + int (*get_clk_drv)(struct dw_mci *);
> + int (*get_clk_sample)(struct dw_mci *);
same with these two functions?
Thanks
James
> + void (*set_clk_drv_sample)(struct dw_mci *host, struct mmc_ios *ios);
> +
> };
>
> #endif /* LINUX_MMC_DW_MMC_H */
>
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
