On Wed, 18 Jul 2012, Javier Martinez Canillas wrote: > On Wed, Jul 18, 2012 at 10:36 AM, Shilimkar, Santosh > <santosh.shilimkar@xxxxxx> wrote: > > On Wed, Jul 18, 2012 at 1:14 PM, S, Venkatraman <svenkatr@xxxxxx> wrote: > >> On Wed, Jul 18, 2012 at 12:40 PM, Tony Lindgren <tony@xxxxxxxxxxx> wrote: > >>> * Shilimkar, Santosh <santosh.shilimkar@xxxxxx> [120718 00:09]: > >>>> On Wed, Jul 18, 2012 at 12:29 PM, Tony Lindgren <tony@xxxxxxxxxxx> wrote: > >>>> > * Javier Martinez Canillas <javier@xxxxxxxxxxxx> [120716 23:56]: > >>>> >> On Tue, Jul 17, 2012 at 8:45 AM, Shilimkar, Santosh > >>>> >> <santosh.shilimkar@xxxxxx> wrote: > >>>> >> > Hi, > >>>> >> > > >>>> >> > On Tue, Jul 17, 2012 at 6:00 AM, Javier Martinez Canillas > >>>> >> > <javier@xxxxxxxxxxxx> wrote: > >>>> >> >> The OMAP MMC and OMAP High Speed MMC hosts now use entirely the DMA > >>>> >> >> engine API instead of the previous private DMA API implementation. > >>>> >> >> > >>>> >> >> So, if the kernel is built with support for any of these hosts but it > >>>> >> >> doesn't support DMA devices nor OMAP DMA support, it fails when trying > >>>> >> >> to obtain a DMA channel which leads to the following error on an OMAP3 > >>>> >> >> IGEPv2 Rev.C board (and probably on most OMAP boards with MMC support): > >>>> >> >> > >>>> >> >> [ 2.199981] omap_hsmmc omap_hsmmc.1: unable to obtain RX DMA engine channel 48 > >>>> >> >> [ 2.215087] omap_hsmmc omap_hsmmc.0: unable to obtain RX DMA engine channel 62 > >>>> >> >> > >>>> >> >> selecting automatically CONFIG_DMADEVICES and CONFIG_DMA_OMAP solves it. > >>>> >> >> > >>>> >> >> Signed-off-by: Javier Martinez Canillas <javier@xxxxxxxxxxxx> > >>>> >> >> --- > >>>> >> > Considering, we are updating drivers to select the DMA engine, can you > >>>> >> > also include > >>>> >> > "drivers/spi/spi-omap2-mcspi.c" which is also updated for DMA engine. > >>>> >> > > >>>> >> > Regards > >>>> >> > Santosh > >>>> >> > >>>> >> Hi Santosh, > >>>> >> > >>>> >> Ok, I'll send a v2 now which includes spi-omap2-mcspi then. > >>>> > > >>>> > I don't think we should do this, the drivers should work with and without > >>>> > dma. This just needs to be added to the omap2plus_defconfig. > >>>> > > >>>> Well this was not decided based on any DMA CONFIG option before for > >>>> the subject drivers. It is already by default enabled if the DMA is supported > >>>> by the driver IP. There is a possibility to disable it from driver platform/dt > >>>> data so that still remains. > >>> > >>> I think it should rather be that if the driver is broken and does not work > >>> without DMA, it should have depends on CONFIG_DMA_OMAP. > >>> > >> I can confirm that omap MMC can't work without DMA; polled mode is not > >> supported / implemented. > > > > Same case for SPI driver as well. It uses DMA for everything except the cases > > where DMA doesn't make sense like 1 byte/2 byte etc. And its not configurable, > > > > At least considering this, it is better we do this per driver than enabling > > it at SOC config. > > > > Regards > > Santosh > > -- > > Hi Santosh, > > And what about enabling it at the SoC config level but making the > drivers dependant on CONFIG_DMADEVICES and CONFIG_DMA_OMAP? If you > agree I can send something like this in two different patches (one for > the omap2plus_defconfig and another to make the drivers dependant on > the config option): > > diff --git a/arch/arm/configs/omap2plus_defconfig > b/arch/arm/configs/omap2plus_defconfig > index b152de7..e58edc3 100644 > --- a/arch/arm/configs/omap2plus_defconfig > +++ b/arch/arm/configs/omap2plus_defconfig > @@ -193,6 +193,8 @@ CONFIG_MMC_OMAP_HS=y > CONFIG_RTC_CLASS=y > CONFIG_RTC_DRV_TWL92330=y > CONFIG_RTC_DRV_TWL4030=y > +CONFIG_DMADEVICES=y > +CONFIG_DMA_OMAP=y > CONFIG_EXT2_FS=y > CONFIG_EXT3_FS=y > # CONFIG_EXT3_FS_XATTR is not set above has been merged, 89269ef1f0abc72c551198123e19cd4edfd43cf4 but I am missing the patches below in mainline (3.6-rc3) -- what happened? as Javier pointed out in https://patchwork.kernel.org/patch/1203391/, MMC is broken support e.g. on beagleboard unless DMA_OMAP is defined I suggest to take below patches and help to avoid some extra gray hair for people looking for a fix for non-booting beagleboards thanks, p. > diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig > index aa131b3..314c7bd 100644 > --- a/drivers/mmc/host/Kconfig > +++ b/drivers/mmc/host/Kconfig > @@ -231,7 +231,7 @@ config MMC_SDHCI_S3C_DMA > > config MMC_OMAP > tristate "TI OMAP Multimedia Card Interface support" > - depends on ARCH_OMAP > + depends on ARCH_OMAP && DMADEVICES && DMA_OMAP > select TPS65010 if MACH_OMAP_H2 > help > This selects the TI OMAP Multimedia card Interface. > @@ -242,7 +242,8 @@ config MMC_OMAP > > config MMC_OMAP_HS > tristate "TI OMAP High Speed Multimedia Card Interface support" > - depends on SOC_OMAP2430 || ARCH_OMAP3 || ARCH_OMAP4 > + depends on (SOC_OMAP2430 || ARCH_OMAP3 || ARCH_OMAP4) && \ > + DMADEVICES && DMA_OMAP > help > This selects the TI OMAP High Speed Multimedia card Interface. > If you have an OMAP2430 or OMAP3 board or OMAP4 board with a > diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig > index cd2fe35..1c23242 100644 > --- a/drivers/spi/Kconfig > +++ b/drivers/spi/Kconfig > @@ -237,7 +237,7 @@ config SPI_OMAP_UWIRE > > config SPI_OMAP24XX > tristate "McSPI driver for OMAP" > - depends on ARCH_OMAP2PLUS > + depends on ARCH_OMAP2PLUS && DMADEVICES && DMA_OMAP > help > SPI master controller for OMAP24XX and later Multichannel SPI > (McSPI) modules. -- Peter Meerwald +43-664-2444418 (mobile) -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
