Some SoC need to set the clock-phase shift.
So Add the callback function into platdata for using phase-shift
Signed-off-by: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
Signed-off-by: Kyungmin Park <kyungmin.park@xxxxxxxxxxx>
---
drivers/mmc/host/dw_mmc.c | 3 +++
include/linux/mmc/dw_mmc.h | 8 ++++++++
2 files changed, 11 insertions(+), 0 deletions(-)
diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
index 8bef3c2..feafa2d 100644
--- a/drivers/mmc/host/dw_mmc.c
+++ b/drivers/mmc/host/dw_mmc.c
@@ -824,6 +824,9 @@ static void dw_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
mci_writel(slot->host, UHS_REG, regs);
+ if (slot->host->pdata->set_clk_drv_sample)
+ slot->host->pdata->set_clk_drv_sample(slot->host, ios);
+
if (ios->clock) {
/*
* Use mirror of ios->clock to prevent race with mmc
diff --git a/include/linux/mmc/dw_mmc.h b/include/linux/mmc/dw_mmc.h
index 7a7ebd3..f20979c 100644
--- a/include/linux/mmc/dw_mmc.h
+++ b/include/linux/mmc/dw_mmc.h
@@ -229,6 +229,9 @@ struct dw_mci_board {
*/
unsigned int fifo_depth;
+ u32 ddr_timing; /* DDR clock phase timing value */
+ u32 sdr_timing; /* SDR clock phase timing value */
+
/* delay in mS before detecting cards after interrupt */
u32 detect_delay_ms;
@@ -249,6 +252,11 @@ struct dw_mci_board {
struct dw_mci_dma_ops *dma_ops;
struct dma_pdata *data;
struct block_settings *blk_settings;
+
+ int (*get_clk_drv)(struct dw_mci *);
+ int (*get_clk_sample)(struct dw_mci *);
+ void (*set_clk_drv_sample)(struct dw_mci *host, struct mmc_ios *ios);
+
};
#endif /* LINUX_MMC_DW_MMC_H */
--
1.7.4.1
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
