The SDHCI controller nodes in platforms which are based on Samsung's Exynos4210
SoC are using the older custom Samsung SDHCI bindings. Remove the old Samsung
specific bindings and use the generic mmc bindings that are defined for mmc
controllers.
Cc: Kukjin Kim <kgene.kim@xxxxxxxxxxx>
Cc: Chris Ball <cjb@xxxxxxxxxx>
Signed-off-by: Thomas Abraham <thomas.abraham@xxxxxxxxxx>
---
arch/arm/boot/dts/exynos4210-origen.dts | 10 ++++------
arch/arm/boot/dts/exynos4210-smdkv310.dts | 5 ++---
2 files changed, 6 insertions(+), 9 deletions(-)
diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts
index 0c49caa..5b5f389 100644
--- a/arch/arm/boot/dts/exynos4210-origen.dts
+++ b/arch/arm/boot/dts/exynos4210-origen.dts
@@ -30,10 +30,9 @@
};
sdhci@12530000 {
- samsung,sdhci-bus-width = <4>;
- linux,mmc_cap_4_bit_data;
+ bus-width = <4>;
samsung,sdhci-cd-internal;
- gpio-cd = <&gpk2 2 2 3 3>;
+ cd-gpios = <&gpk2 2 2 3 3>;
gpios = <&gpk2 0 2 0 3>,
<&gpk2 1 2 0 3>,
<&gpk2 3 2 3 3>,
@@ -43,10 +42,9 @@
};
sdhci@12510000 {
- samsung,sdhci-bus-width = <4>;
- linux,mmc_cap_4_bit_data;
+ bus-width = <4>;
samsung,sdhci-cd-internal;
- gpio-cd = <&gpk0 2 2 3 3>;
+ cd-gpios = <&gpk0 2 2 3 3>;
gpios = <&gpk0 0 2 0 3>,
<&gpk0 1 2 0 3>,
<&gpk0 3 2 3 3>,
diff --git a/arch/arm/boot/dts/exynos4210-smdkv310.dts b/arch/arm/boot/dts/exynos4210-smdkv310.dts
index 1beccc8..f090095 100644
--- a/arch/arm/boot/dts/exynos4210-smdkv310.dts
+++ b/arch/arm/boot/dts/exynos4210-smdkv310.dts
@@ -30,10 +30,9 @@
};
sdhci@12530000 {
- samsung,sdhci-bus-width = <4>;
- linux,mmc_cap_4_bit_data;
+ bus-width = <4>;
samsung,sdhci-cd-internal;
- gpio-cd = <&gpk2 2 2 3 3>;
+ cd-gpios = <&gpk2 2 2 3 3>;
gpios = <&gpk2 0 2 0 3>,
<&gpk2 1 2 0 3>,
<&gpk2 3 2 3 3>,
--
1.6.6.rc2
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
