[PATCH 1/3] mmc: dw_mmc: amend using error interrupt status

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



RINTSTS status includes masked interrupts as well as unmasked.
data_status and cmd_status are set by value of RINTSTS in interrupt handler
and tasklet finally uses it to decide whether error is happened or not.
In addition, MINTSTS status is used for setting data_status in PIO.
Masked error interrupt will not be handled and that status can be considered
non-error case.

Signed-off-by: Seungwon Jeon <tgih.jun@xxxxxxxxxxx>
---
 drivers/mmc/host/dw_mmc.c |   11 +++++------
 1 files changed, 5 insertions(+), 6 deletions(-)

diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
index 72dc3cd..7baed45 100644
--- a/drivers/mmc/host/dw_mmc.c
+++ b/drivers/mmc/host/dw_mmc.c
@@ -1547,12 +1547,11 @@ static void dw_mci_cmd_interrupt(struct dw_mci *host, u32 status)
 static irqreturn_t dw_mci_interrupt(int irq, void *dev_id)
 {
 	struct dw_mci *host = dev_id;
-	u32 status, pending;
+	u32 pending;
 	unsigned int pass_count = 0;
 	int i;
 
 	do {
-		status = mci_readl(host, RINTSTS);
 		pending = mci_readl(host, MINTSTS); /* read-only mask reg */
 
 		/*
@@ -1570,7 +1569,7 @@ static irqreturn_t dw_mci_interrupt(int irq, void *dev_id)
 
 		if (pending & DW_MCI_CMD_ERROR_FLAGS) {
 			mci_writel(host, RINTSTS, DW_MCI_CMD_ERROR_FLAGS);
-			host->cmd_status = status;
+			host->cmd_status = pending;
 			smp_wmb();
 			set_bit(EVENT_CMD_COMPLETE, &host->pending_events);
 		}
@@ -1578,7 +1577,7 @@ static irqreturn_t dw_mci_interrupt(int irq, void *dev_id)
 		if (pending & DW_MCI_DATA_ERROR_FLAGS) {
 			/* if there is an error report DATA_ERROR */
 			mci_writel(host, RINTSTS, DW_MCI_DATA_ERROR_FLAGS);
-			host->data_status = status;
+			host->data_status = pending;
 			smp_wmb();
 			set_bit(EVENT_DATA_ERROR, &host->pending_events);
 			if (!(pending & (SDMMC_INT_DTO | SDMMC_INT_DCRC |
@@ -1589,7 +1588,7 @@ static irqreturn_t dw_mci_interrupt(int irq, void *dev_id)
 		if (pending & SDMMC_INT_DATA_OVER) {
 			mci_writel(host, RINTSTS, SDMMC_INT_DATA_OVER);
 			if (!host->data_status)
-				host->data_status = status;
+				host->data_status = pending;
 			smp_wmb();
 			if (host->dir_status == DW_MCI_RECV_STATUS) {
 				if (host->sg != NULL)
@@ -1613,7 +1612,7 @@ static irqreturn_t dw_mci_interrupt(int irq, void *dev_id)
 
 		if (pending & SDMMC_INT_CMD_DONE) {
 			mci_writel(host, RINTSTS, SDMMC_INT_CMD_DONE);
-			dw_mci_cmd_interrupt(host, status);
+			dw_mci_cmd_interrupt(host, pending);
 		}
 
 		if (pending & SDMMC_INT_CD) {
-- 
1.7.0.4


--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux