Correct spelling in printk and comments in mmc/hosts.
Signed-off-by: Masanari Iida <standby24x7@xxxxxxxxx>
---
drivers/mmc/core/sdio.c | 2 +-
drivers/mmc/host/at91_mci.c | 2 +-
drivers/mmc/host/atmel-mci.c | 2 +-
drivers/mmc/host/omap_hsmmc.c | 2 +-
drivers/mmc/host/sdhci-esdhc-imx.c | 2 +-
drivers/mmc/host/vub300.c | 2 +-
6 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c
index 41c5fd8..595e1c8 100644
--- a/drivers/mmc/core/sdio.c
+++ b/drivers/mmc/core/sdio.c
@@ -644,7 +644,7 @@ static int mmc_sdio_init_card(struct mmc_host *host, u32 ocr,
/*
* If the host and card support UHS-I mode request the card
* to switch to 1.8V signaling level. No 1.8v signalling if
- * UHS mode is not enabled to maintain compatibilty and some
+ * UHS mode is not enabled to maintain compatibility and some
* systems that claim 1.8v signalling in fact do not support
* it.
*/
diff --git a/drivers/mmc/host/at91_mci.c b/drivers/mmc/host/at91_mci.c
index efdb81d..74bed0f 100644
--- a/drivers/mmc/host/at91_mci.c
+++ b/drivers/mmc/host/at91_mci.c
@@ -356,7 +356,7 @@ static void at91_mci_handle_transmitted(struct at91mci_host *host)
}
/*
- * Update bytes tranfered count during a write operation
+ * Update bytes transfered count during a write operation
*/
static void at91_mci_update_bytes_xfered(struct at91mci_host *host)
{
diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
index f2c115e..383c93b 100644
--- a/drivers/mmc/host/atmel-mci.c
+++ b/drivers/mmc/host/atmel-mci.c
@@ -1015,7 +1015,7 @@ static void atmci_stop_transfer(struct atmel_mci *host)
}
/*
- * Stop data transfer because error(s) occured.
+ * Stop data transfer because error(s) occurred.
*/
static void atmci_stop_transfer_pdc(struct atmel_mci *host)
{
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index 9a7a60a..4d4f097 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -448,7 +448,7 @@ static void omap_hsmmc_stop_clock(struct omap_hsmmc_host *host)
OMAP_HSMMC_WRITE(host->base, SYSCTL,
OMAP_HSMMC_READ(host->base, SYSCTL) & ~CEN);
if ((OMAP_HSMMC_READ(host->base, SYSCTL) & CEN) != 0x0)
- dev_dbg(mmc_dev(host->mmc), "MMC Clock is not stoped\n");
+ dev_dbg(mmc_dev(host->mmc), "MMC Clock is not stopped\n");
}
static void omap_hsmmc_enable_irq(struct omap_hsmmc_host *host,
diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c
index ebbe984..ca22b6b 100644
--- a/drivers/mmc/host/sdhci-esdhc-imx.c
+++ b/drivers/mmc/host/sdhci-esdhc-imx.c
@@ -313,7 +313,7 @@ static void esdhc_writeb_le(struct sdhci_host *host, u8 val, int reg)
new_val = val & (SDHCI_CTRL_LED | \
SDHCI_CTRL_4BITBUS | \
SDHCI_CTRL_D3CD);
- /* ensure the endianess */
+ /* ensure the endianness */
new_val |= ESDHC_HOST_CONTROL_LE;
/* DMA mode bits are shifted */
new_val |= (val & SDHCI_CTRL_DMA_MASK) << 5;
diff --git a/drivers/mmc/host/vub300.c b/drivers/mmc/host/vub300.c
index 3135a1a..58eab9a 100644
--- a/drivers/mmc/host/vub300.c
+++ b/drivers/mmc/host/vub300.c
@@ -806,7 +806,7 @@ static void command_res_completed(struct urb *urb)
* we suspect a buggy USB host controller
*/
} else if (!vub300->data) {
- /* this means that the command (typically CMD52) suceeded */
+ /* this means that the command (typically CMD52) succeeded */
} else if (vub300->resp.common.header_type != 0x02) {
/*
* this is an error response from the VUB300 chip
--
1.7.12.rc0.56.g425b8a2
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
