Add device tree based discovery support. Signed-off-by: Thomas Abraham <thomas.abraham@xxxxxxxxxx> --- .../devicetree/bindings/mmc/synposis-dw-mshc.txt | 108 +++++++++++ drivers/mmc/host/dw_mmc-pltfm.c | 24 +++ drivers/mmc/host/dw_mmc.c | 201 +++++++++++++++++++- drivers/mmc/host/dw_mmc.h | 9 + include/linux/mmc/dw_mmc.h | 2 + 5 files changed, 338 insertions(+), 6 deletions(-) create mode 100644 Documentation/devicetree/bindings/mmc/synposis-dw-mshc.txt diff --git a/Documentation/devicetree/bindings/mmc/synposis-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/synposis-dw-mshc.txt new file mode 100644 index 0000000..3acd6c9 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/synposis-dw-mshc.txt @@ -0,0 +1,108 @@ +* Synopsis Designware Mobile Storage Host Controller + +The Synopsis designware mobile storage host controller is used to interface +a SoC with storage medium such as eMMC or SD/MMC cards. + +Required Properties: + +* compatible: should be one of the following + - snps,dw-mshc: for controllers compliant with synopsis dw-mshc. + +* reg: physical base address of the dw-mshc controller and size of its memory + region. + +* interrupts: interrupt specifier for the controller. The format and value of + the interrupt specifier depends on the interrupt parent for the controller. + +* #address-cells: should be 1. + +* #size-cells: should be 0. + +# Slots: The slot specific information are contained within child-nodes with + each child-node representing a supported slot. There should be atleast one + child node representing a card slot. The name of the child node representing + the slot is recommended to be slot@n where n is the unique number of the slot + connnected to the controller. The following are optional properties which + can be included in the slot child node. + + * reg: specifies the physical slot number. The valid values of this + property is 0 to (num-slots -1), where num-slots is the value + specified by the num-slots property. + + * bus-width: specifies the width of the data bus connected from the + controller to the card slot. The value should be 1, 4 or 8. In case + this property is not specified, a default value of 1 is assumed for + this property. + + * cd-gpios: specifies the card detect gpio line. The format of the + gpio specifier depends on the gpio controller. + + * wp-gpios: specifies the write protect gpio line. The format of the + gpio specifier depends on the gpio controller. + + * gpios: specifies a list of gpios used for command, clock and data + bus. The first gpio is the command line and the second gpio is the + clock line. The rest of the gpios (depending on the bus-width + property) are the data lines in no particular order. The format of + the gpio specifier depends on the gpio controller. + +Optional properties: + +* num-slots: specifies the number of slots supported by the controller. + The number of physical slots actually used could be equal or less than the + value specified by num-slots. If this property is not specified, the value + of num-slot property is assumed to be 1. + +* fifo-depth: The maximum size of the tx/rx fifo's. If this property is not + specified, the default value of the fifo size is determined from the + controller registers. + +* card-detect-delay: Delay in milli-seconds before detecting card after card + insert event. The default value is 0. + +* supports-highspeed: Enables support for high speed cards (upto 50MHz) + +* card-detection-broken: The card detection functionality is not available on + any of the slots. + +* no-write-protect: The write protect pad of the controller is not connected + to the write protect pin on the slot. + +Aliases: + +- All the MSHC controller nodes should be represented in the aliases node using + the following format 'mshc{n}' where n is a unique number for the alias. + + +Example: + + The MSHC controller node can be split into two portions, SoC specific and + board specific portions as listed below. + + dwmmc0@12200000 { + compatible = "snps,dw-mshc"; + reg = <0x12200000 0x1000>; + interrupts = <0 75 0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + dwmmc0@12200000 { + num-slots = <1>; + supports-highspeed; + card-detection-broken; + no-write-protect; + fifo-depth = <0x80>; + card-detect-delay = <200>; + + slot@0 { + reg = <0>; + bus-width = <8>; + cd-gpios = <&gpc0 2 2 3 3>; + gpios = <&gpc0 0 2 0 3>, <&gpc0 1 2 0 3>, + <&gpc1 0 2 3 3>, <&gpc1 1 2 3 3>, + <&gpc1 2 2 3 3>, <&gpc1 3 2 3 3>, + <&gpc0 3 2 3 3>, <&gpc0 4 2 3 3>, + <&gpc0 5 2 3 3>, <&gpc0 6 2 3 3>; + }; + }; diff --git a/drivers/mmc/host/dw_mmc-pltfm.c b/drivers/mmc/host/dw_mmc-pltfm.c index 9a63299..8d24f6d 100644 --- a/drivers/mmc/host/dw_mmc-pltfm.c +++ b/drivers/mmc/host/dw_mmc-pltfm.c @@ -19,8 +19,24 @@ #include <linux/mmc/host.h> #include <linux/mmc/mmc.h> #include <linux/mmc/dw_mmc.h> +#include <linux/of.h> #include "dw_mmc.h" +#ifdef CONFIG_OF +static struct dw_mci_drv_data synopsis_drv_data = { + .ctrl_type = DW_MCI_TYPE_SYNOPSIS, +}; + +static const struct of_device_id dw_mci_pltfm_match[] = { + { .compatible = "snps,dw-mshc", + .data = (void *)&synopsis_drv_data, }, + {}, +}; +MODULE_DEVICE_TABLE(of, dw_mci_pltfm_match); +#else +static const struct of_device_id dw_mci_pltfm_match[]; +#endif + static int dw_mci_pltfm_probe(struct platform_device *pdev) { struct dw_mci *host; @@ -51,6 +67,13 @@ static int dw_mci_pltfm_probe(struct platform_device *pdev) if (!host->regs) goto err_free; platform_set_drvdata(pdev, host); + + if (pdev->dev.of_node) { + const struct of_device_id *match; + match = of_match_node(dw_mci_pltfm_match, pdev->dev.of_node); + host->drv_data = match->data; + } + ret = dw_mci_probe(host); if (ret) goto err_out; @@ -111,6 +134,7 @@ static struct platform_driver dw_mci_pltfm_driver = { .remove = __exit_p(dw_mci_pltfm_remove), .driver = { .name = "dw_mmc", + .of_match_table = of_match_ptr(dw_mci_pltfm_match), .pm = &dw_mci_pltfm_pmops, }, }; diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c index 075f89d..3bc276d 100644 --- a/drivers/mmc/host/dw_mmc.c +++ b/drivers/mmc/host/dw_mmc.c @@ -33,9 +33,13 @@ #include <linux/bitops.h> #include <linux/regulator/consumer.h> #include <linux/workqueue.h> +#include <linux/of.h> +#include <linux/of_gpio.h> #include "dw_mmc.h" +#define NUM_PINS(x) (x + 2) + /* Common flag combinations */ #define DW_MCI_DATA_ERROR_FLAGS (SDMMC_INT_DTO | SDMMC_INT_DCRC | \ SDMMC_INT_HTO | SDMMC_INT_SBE | \ @@ -86,6 +90,8 @@ struct idmac_desc { struct dw_mci_slot { struct mmc_host *mmc; struct dw_mci *host; + int wp_gpio; + int cd_gpio; u32 ctype; @@ -1762,10 +1768,106 @@ static void dw_mci_work_routine_card(struct work_struct *work) } } +#ifdef CONFIG_OF +static struct device_node *dw_mci_of_find_slot_node(struct device *dev, u8 slot) +{ + struct device_node *np; + const __be32 *addr; + int len; + + if (!dev || !dev->of_node) + return NULL; + + for_each_child_of_node(dev->of_node, np) { + addr = of_get_property(np, "reg", &len); + if (!addr || (len < sizeof(int))) + continue; + if (be32_to_cpup(addr) == slot) + return np; + } + return NULL; +} + +static u32 dw_mci_of_get_bus_wd(struct device *dev, u8 slot) +{ + struct device_node *np = dw_mci_of_find_slot_node(dev, slot); + u32 bus_wd = 1; + + if (!np) + return 1; + + if (of_property_read_u32(np, "bus-width", &bus_wd)) + dev_err(dev, "bus-width property not found, assuming width" + " as 1\n"); + return bus_wd; +} + +static int dw_mci_of_setup_bus(struct dw_mci *host, u8 slot, u32 bus_wd) +{ + struct device_node *np = dw_mci_of_find_slot_node(host->dev, slot); + int idx, gpio, ret; + + if (!np) + return -EINVAL; + + for (idx = 0; idx < NUM_PINS(bus_wd); idx++) { + gpio = of_get_gpio(np, idx); + if (!gpio_is_valid(gpio)) { + dev_err(host->dev, "invalid gpio: %d\n", gpio); + return -EINVAL; + } + + ret = devm_gpio_request(host->dev, gpio, "dw-mci-bus"); + if (ret) { + dev_err(host->dev, "gpio [%d] request failed\n", gpio); + return -EBUSY; + } + } + + host->slot[slot]->wp_gpio = -1; + gpio = of_get_named_gpio(np, "wp-gpios", 0); + if (!gpio_is_valid(gpio)) { + dev_info(host->dev, "wp gpio not available"); + } else { + ret = devm_gpio_request(host->dev, gpio, "dw-mci-wp"); + if (ret) + dev_info(host->dev, "gpio [%d] request failed\n", + gpio); + else + host->slot[slot]->wp_gpio = gpio; + } + + host->slot[slot]->cd_gpio = -1; + gpio = of_get_named_gpio(np, "cd-gpios", 0); + if (!gpio_is_valid(gpio)) { + dev_info(host->dev, "cd gpio not available"); + } else { + ret = devm_gpio_request(host->dev, gpio, "dw-mci-cd"); + if (ret) + dev_err(host->dev, "gpio [%d] request failed\n", gpio); + else + host->slot[slot]->cd_gpio = gpio; + } + + return 0; +} +#else /* CONFIG_OF */ +static u32 dw_mci_of_get_bus_wd(struct device *dev, u8 slot) +{ + return 1; +} + +static int dw_mci_of_setup_bus(struct dw_mci *host, u8 slot, u32 bus_wd) +{ + return -EINVAL; +} +#endif /* CONFIG_OF */ + static int __init dw_mci_init_slot(struct dw_mci *host, unsigned int id) { struct mmc_host *mmc; struct dw_mci_slot *slot; + int ctrl_id, ret; mmc = mmc_alloc_host(sizeof(struct dw_mci_slot), host->dev); if (!mmc) @@ -1775,6 +1877,7 @@ static int __init dw_mci_init_slot(struct dw_mci *host, unsigned int id) slot->id = id; slot->mmc = mmc; slot->host = host; + host->slot[id] = slot; mmc->ops = &dw_mci_ops; mmc->f_min = DIV_ROUND_UP(host->bus_hz, 510); @@ -1795,12 +1898,33 @@ static int __init dw_mci_init_slot(struct dw_mci *host, unsigned int id) if (host->pdata->caps) mmc->caps = host->pdata->caps; + if (host->dev->of_node) { + ctrl_id = of_alias_get_id(host->dev->of_node, "mshc"); + if (ctrl_id < 0) + ctrl_id = 0; + } + if (host->drv_data->caps) + mmc->caps |= host->drv_data->caps[ctrl_id]; + if (host->pdata->caps2) mmc->caps2 = host->pdata->caps2; - if (host->pdata->get_bus_wd) + if (host->pdata->get_bus_wd) { if (host->pdata->get_bus_wd(slot->id) >= 4) mmc->caps |= MMC_CAP_4_BIT_DATA; + } else if (host->dev->of_node) { + unsigned int bus_width; + bus_width = dw_mci_of_get_bus_wd(host->dev, slot->id); + switch (bus_width) { + case 8: + mmc->caps |= MMC_CAP_8_BIT_DATA; + case 4: + mmc->caps |= MMC_CAP_4_BIT_DATA; + } + ret = dw_mci_of_setup_bus(host, slot->id, bus_width); + if (ret) + goto err_setup_bus; + } if (host->pdata->quirks & DW_MCI_QUIRK_HIGHSPEED) mmc->caps |= MMC_CAP_SD_HIGHSPEED | MMC_CAP_MMC_HIGHSPEED; @@ -1845,7 +1969,6 @@ static int __init dw_mci_init_slot(struct dw_mci *host, unsigned int id) else clear_bit(DW_MMC_CARD_PRESENT, &slot->flags); - host->slot[id] = slot; mmc_add_host(mmc); #if defined(CONFIG_DEBUG_FS) @@ -1862,6 +1985,10 @@ static int __init dw_mci_init_slot(struct dw_mci *host, unsigned int id) queue_work(host->card_workqueue, &host->card_work); return 0; + +err_setup_bus: + mmc_free_host(mmc); + return -EINVAL; } static void dw_mci_cleanup_slot(struct dw_mci_slot *slot, unsigned int id) @@ -1937,16 +2064,78 @@ static bool mci_wait_reset(struct device *dev, struct dw_mci *host) return false; } +#ifdef CONFIG_OF +static struct dw_mci_of_quirks { + char *quirk; + int id; +} of_quriks[] = { + { + .quirk = "supports-highspeed", + .id = DW_MCI_QUIRK_HIGHSPEED, + }, { + .quirk = "card-detection-broken", + .id = DW_MCI_QUIRK_BROKEN_CARD_DETECTION, + }, { + .quirk = "no-write-protect", + .id = DW_MCI_QUIRK_NO_WRITE_PROTECT, + } +}; + +static struct dw_mci_board *dw_mci_parse_dt(struct dw_mci *host) +{ + struct dw_mci_board *pdata; + struct device *dev = host->dev; + struct device_node *np = dev->of_node; + int idx, cnt; + + pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) { + dev_err(dev, "could not allocate memory for pdata\n"); + return ERR_PTR(-ENOMEM); + } + + /* find out number of slots supported */ + if (of_property_read_u32(dev->of_node, "num-slots", + &pdata->num_slots)) { + dev_info(dev, "num-slots property not found, " + "assuming 1 slot is available\n"); + pdata->num_slots = 1; + } + + /* get quirks */ + cnt = sizeof(of_quriks) / sizeof(struct dw_mci_of_quirks); + for (idx = 0; idx < cnt; idx++) + if (of_get_property(np, of_quriks[idx].quirk, NULL)) + pdata->quirks |= of_quriks[idx].id; + + if (of_property_read_u32(np, "fifo-depth", &pdata->fifo_depth)) + dev_info(dev, "fifo-depth property not found, using " + "value of FIFOTH register as default\n"); + + of_property_read_u32(np, "card-detect-delay", &pdata->detect_delay_ms); + + return pdata; +} + +#else /* CONFIG_OF */ +static struct dw_mci_board *dw_mci_parse_dt(struct dw_mci *host) +{ + return ERR_PTR(-EINVAL); +} +#endif /* CONFIG_OF */ + int dw_mci_probe(struct dw_mci *host) { int width, i, ret = 0; u32 fifo_size; int init_slots = 0; - if (!host->pdata || !host->pdata->init) { - dev_err(host->dev, - "Platform data must supply init function\n"); - return -ENODEV; + if (!host->pdata) { + host->pdata = dw_mci_parse_dt(host); + if (IS_ERR(host->pdata)) { + dev_err(host->dev, "platform data not available\n"); + return -EINVAL; + } } if (!host->pdata->select_slot && host->pdata->num_slots > 1) { diff --git a/drivers/mmc/host/dw_mmc.h b/drivers/mmc/host/dw_mmc.h index 15c27e1..1ecaa02 100644 --- a/drivers/mmc/host/dw_mmc.h +++ b/drivers/mmc/host/dw_mmc.h @@ -182,4 +182,13 @@ extern int dw_mci_suspend(struct dw_mci *host); extern int dw_mci_resume(struct dw_mci *host); #endif +/* Variations in the dw_mci controller */ +#define DW_MCI_TYPE_SYNOPSIS 0 + +/* dw_mci platform driver data */ +struct dw_mci_drv_data { + unsigned long ctrl_type; + unsigned long *caps; +}; + #endif /* _DW_MMC_H_ */ diff --git a/include/linux/mmc/dw_mmc.h b/include/linux/mmc/dw_mmc.h index b72e4aa..ae45e4f 100644 --- a/include/linux/mmc/dw_mmc.h +++ b/include/linux/mmc/dw_mmc.h @@ -78,6 +78,7 @@ struct mmc_data; * @data_offset: Set the offset of DATA register according to VERID. * @dev: Device associated with the MMC controller. * @pdata: Platform data associated with the MMC controller. + * @drv_data: Driver specific data for identified variant of the controller * @biu_clk: Pointer to bus interface unit clock instance. * @ciu_clk: Pointer to card interface unit clock instance. * @slot: Slots sharing this MMC controller. @@ -160,6 +161,7 @@ struct dw_mci { u16 data_offset; struct device *dev; struct dw_mci_board *pdata; + struct dw_mci_drv_data *drv_data; struct clk *biu_clk; struct clk *ciu_clk; struct dw_mci_slot *slot[MAX_MCI_SLOTS]; -- 1.6.6.rc2 -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html