Am Montag, 2. Juli 2012, 14:13:31 schrieb Saugata Das: > On 2 July 2012 12:26, Venkatraman S <svenkatr@xxxxxx> wrote: > > This reverts commit 3d93576e(skip card initialization if > > power class selection fails). > > Problem has been reported when this is used with eMMC4.41 > > card with Tegra Platform. Till the issue is root caused, > > bus width selection failure should not be treated as fatal. > > According to me, we need to find the root issue (which could be either > host not able to provide enough current or faulty eMMC). Do we know, > what could be the side effect of working on eMMC with less power than > what it has requested in PWR_CL ? > > One known issue with the current power class selection is that we do > not check the current requirement for a selected power class. It > assumes that host is able to provide the maximum current needed at > highest speed (> 800mA). Is it already checked on Tegra ? Acording to the schematic, the emmc is "fused" with 150mA and 450mA. There are many supplies connected to it, so it is hard to tell what is the maximum, but certainly not 800 mA. Why do you think it should be such high? Powerclass "7" means 270 mA max and 160 mA RMS (dual voltage card). Btw, you may successfully google for the "schematic document" for this "paz00" board in question. Marc -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
