mmc_execute_hpi should send the HPI command only
once, and only if the card is in PRG state.
According to eMMC spec, the command's completion time is
not dependent on OUT_OF_INTERRUPT_TIME. Only the transition
out of PRG STATE is guarded by OUT_OF_INTERRUPT_TIME - which is
defined to begin at the end of sending the command itself.
Specify the default timeout for the actual sending of HPI
command, and then use OUT_OF_INTERRUPT_TIME to wait for
the transition out of PRG state.
Reported-by: Alex Lemberg <Alex.Lemberg@xxxxxxxxxxx>
Signed-off-by: Venkatraman S <svenkatr@xxxxxx>
Reviewed-by: Namjae Jeon <linkinjeon@xxxxxxxxx>
Acked-by: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
CC: Kostya <kdorfman@xxxxxxxxxxxxxx>
---
v3->v4: Fix coding style issues as suggested by Chris Ball.
Use time_after() for safe time diff calculations as
suggested by Subash Jadavani.
drivers/mmc/core/core.c | 55 ++++++++++++++++++++++++++------------------
drivers/mmc/core/mmc_ops.c | 1 -
2 files changed, 32 insertions(+), 24 deletions(-)
diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index 80ec427..0d4bb19 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -404,6 +404,7 @@ int mmc_interrupt_hpi(struct mmc_card *card)
{
int err;
u32 status;
+ unsigned long prg_wait;
BUG_ON(!card);
@@ -419,30 +420,38 @@ int mmc_interrupt_hpi(struct mmc_card *card)
goto out;
}
- /*
- * If the card status is in PRG-state, we can send the HPI command.
- */
- if (R1_CURRENT_STATE(status) == R1_STATE_PRG) {
- do {
- /*
- * We don't know when the HPI command will finish
- * processing, so we need to resend HPI until out
- * of prg-state, and keep checking the card status
- * with SEND_STATUS. If a timeout error occurs when
- * sending the HPI command, we are already out of
- * prg-state.
- */
- err = mmc_send_hpi_cmd(card, &status);
- if (err)
- pr_debug("%s: abort HPI (%d error)\n",
- mmc_hostname(card->host), err);
+ switch (R1_CURRENT_STATE(status)) {
+ case R1_STATE_IDLE:
+ case R1_STATE_READY:
+ case R1_STATE_STBY:
+ /*
+ * In idle states, HPI is not needed and the caller
+ * can issue the next intended command immediately
+ */
+ goto out;
+ case R1_STATE_PRG:
+ break;
+ default:
+ /* In all other states, it's illegal to issue HPI */
+ pr_debug("%s: HPI cannot be sent. Card state=%d\n",
+ mmc_hostname(card->host), R1_CURRENT_STATE(status));
+ err = -EINVAL;
+ goto out;
+ }
- err = mmc_send_status(card, &status);
- if (err)
- break;
- } while (R1_CURRENT_STATE(status) == R1_STATE_PRG);
- } else
- pr_debug("%s: Left prg-state\n", mmc_hostname(card->host));
+ prg_wait = jiffies + msecs_to_jiffies(card->ext_csd.out_of_int_time);
+ err = mmc_send_hpi_cmd(card, &status);
+ if (err)
+ goto out;
+
+ do {
+ err = mmc_send_status(card, &status);
+
+ if (!err && R1_CURRENT_STATE(status) == R1_STATE_TRAN)
+ break;
+ if (time_after(jiffies, prg_wait))
+ err = -ETIMEDOUT;
+ } while (!err);
out:
mmc_release_host(card->host);
diff --git a/drivers/mmc/core/mmc_ops.c b/drivers/mmc/core/mmc_ops.c
index 69370f4..0ed2cc5 100644
--- a/drivers/mmc/core/mmc_ops.c
+++ b/drivers/mmc/core/mmc_ops.c
@@ -569,7 +569,6 @@ int mmc_send_hpi_cmd(struct mmc_card *card, u32 *status)
cmd.opcode = opcode;
cmd.arg = card->rca << 16 | 1;
- cmd.cmd_timeout_ms = card->ext_csd.out_of_int_time;
err = mmc_wait_for_cmd(card->host, &cmd, 0);
if (err) {
--
1.7.10.rc2
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
