Hi Subhash,
On 06/13/2012 09:45 PM, Subhash Jadavani wrote:
> Hi Jaehoon,
>
> Find few comments inline below. Also, periodic BKOPs support was present in v8 but now you have removed it in v9. Is there any reason for it?
Yes, there is the periodic bkops in v-8. But, i have discussed this with Konstantin and Maya.
1) Submit Basic BKOPS in priority work.
2) after (1), we can add the periodic bkops.
The periodic bkops also need for eMMC's maintenance. but First, we want to merge the basic bkops feature in mainline.
The Periodic bkops should be other patch.
>
> Regards,
> Subhash
>
> On 6/8/2012 10:09 AM, Jaehoon Chung wrote:
>> Enable eMMC background operations (BKOPS) feature.
>>
>> If URGENT_BKOPS is set after a response, note that BKOPS
>> are required. After all I/O requests are finished, run
>> BKOPS if required. Should read/write operations be requested
>> during BKOPS, first issue HPI to interrupt the ongoing BKOPS
>> and then service the request.
>> If BKOPS-STATUS is upper than LEVEL2, need to check until clear
>> the BKOPS-STATUS vaule.
>>
>> If you want to enable this feature, set MMC_CAP2_BKOPS.
>> And if you want to set the BKOPS_EN bit in ext_csd register,
>> use the MMC_CAP2_INIT_BKOPS.
>>
>> Future considerations
>> * Check BKOPS_LEVEL=1 and start BKOPS in a preventive manner.
>> * Interrupt ongoing BKOPS before powering off the card.
>> * How get BKOPS_STATUS value.(periodically send ext_csd command?)
>>
>> Signed-off-by: Jaehoon Chung<jh80.chung@xxxxxxxxxxx>
>> Signed-off-by: Kyungmin Park<kyungmin.park@xxxxxxxxxxx>
>> Signed-off-by: Konstantin Dorfman<kdorfman@xxxxxxxxxxxxxx>
>> Signed-off-by: Maya Erez<merez@xxxxxxxxxxxxxx>
>> ---
>> Changelog V9:
>> - Rebased on patch-v7.
>> - Added Konstantin and Maya's patch
>> : mmc:core: Define synchronous BKOPS timeout
>> : mmc:core: eMMC4.5 BKOPS fixes
>> - Removed periodic bkops
>> : This feature will do in future work
>> - Add __mmc_switch() for waiting_for_prod_done.
>>
>> Changelog V8:
>> - Remove host->lock spin lock reviewed by Adrian
>> - Support periodic start bkops
>> - when bkops_status is level-3, if timeout is set to 0, send hpi.
>> - Move the start-bkops point
>> Changelog V7:
>> - Use HPI command when issued URGENT_BKOPS
>> - Recheck until clearing the bkops-status bit.
>> Changelog V6:
>> - Add the flag of check-bkops-status.
>> (For fixing async_req problem)
>> - Add the capability for MMC_CAP2_INIT_BKOPS.
>> (When unset the bkops_en bit in ext_csd register)
>> - modify the wrong condition.
>> Changelog V5:
>> - Rebase based on the latest mmc-next.
>> - modify codes based-on Chris's comment
>> Changelog V4:
>> - Add mmc_read_bkops_status
>> - When URGENT_BKOPS(level2-3), didn't use HPI command.
>> - In mmc_switch(), use R1B/R1 according to level.
>> Changelog V3:
>> - move the bkops setting's location in mmc_blk_issue_rw_rq
>> - modify condition checking
>> - bkops_en is assigned ext_csd[EXT_CSD_BKOPS_EN] instead of "1"
>> - remove the unused code
>> - change pr_debug instead of pr_warn in mmc_send_hpi_cmd
>> - Add the Future consideration suggested by Per
>> Changelog V2:
>> - Use EXCEPTION_STATUS instead of URGENT_BKOPS
>> - Add function to check Exception_status(for eMMC4.5)
>> ---
>> drivers/mmc/card/queue.c | 2 +
>> drivers/mmc/core/core.c | 161 +++++++++++++++++++++++++++++++++++++++++++-
>> drivers/mmc/core/mmc.c | 18 +++++
>> drivers/mmc/core/mmc_ops.c | 27 ++++++-
>> include/linux/mmc/card.h | 16 +++++
>> include/linux/mmc/core.h | 5 ++
>> include/linux/mmc/host.h | 2 +
>> include/linux/mmc/mmc.h | 19 +++++
>> 8 files changed, 243 insertions(+), 7 deletions(-)
>>
>> diff --git a/drivers/mmc/card/queue.c b/drivers/mmc/card/queue.c
>> index e360a97..e4a2cde 100644
>> --- a/drivers/mmc/card/queue.c
>> +++ b/drivers/mmc/card/queue.c
>> @@ -66,6 +66,8 @@ static int mmc_queue_thread(void *d)
>> spin_unlock_irq(q->queue_lock);
>>
>> if (req || mq->mqrq_prev->req) {
>> + if (mmc_card_doing_bkops(mq->card))
>> + mmc_stop_bkops(mq->card);
> This is what we had discussed last time but i don't see that you are considering error returned by mmc_stop_bkops(). Any reason for it?
> [Subhash] mmc_stop_bkops() may fail and can return an error but we are ignoring it here. What if this function has returned error which means BKOPS may still be running in card and if you go ahead and issue another read/write request?
> [Jaehoon] Great..i didn't think that..I will consider this point. Thanks.
Will do fix..
>
>> set_current_state(TASK_RUNNING);
>> mq->issue_fn(mq, req);
>> } else {
>> diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
>> index 0b6141d..9adb004 100644
>> --- a/drivers/mmc/core/core.c
>> +++ b/drivers/mmc/core/core.c
>> @@ -41,6 +41,12 @@
>> #include "sd_ops.h"
>> #include "sdio_ops.h"
>>
>> +/*
>> + * The Background operation can take a long time, depends on the house keeping
>> + * operations the card has to peform
>> + */
>> +#define MMC_BKOPS_MAX_TIMEOUT (4 * 80 * 1000) /* max time to wait in ms */
>> +
>> static struct workqueue_struct *workqueue;
>> static const unsigned freqs[] = { 400000, 300000, 200000, 100000 };
>>
>> @@ -175,6 +181,16 @@ void mmc_request_done(struct mmc_host *host, struct mmc_request *mrq)
>> if (mrq->done)
>> mrq->done(mrq);
>>
>> + /*
>> + * Check BKOPS urgency from each R1 response
>> + */
>> + if (host->card&& mmc_card_mmc(host->card)&&
>> + ((mmc_resp_type(cmd) == MMC_RSP_R1) ||
>> + (mmc_resp_type(cmd) == MMC_RSP_R1B))&&
>> + (cmd->resp[0]& R1_EXCEPTION_EVENT)) {
>> + mmc_card_set_check_bkops(host->card);
>> + }
>> +
>> mmc_host_clk_release(host);
>> }
>> }
>> @@ -245,6 +261,74 @@ mmc_start_request(struct mmc_host *host, struct mmc_request *mrq)
>> host->ops->request(host, mrq);
>> }
>>
>> +/**
>> + * mmc_start_bkops - start BKOPS for supported cards
>> + * @card: MMC card to start BKOPS
>> + *
>> + * Start background operations whenever requested.
>> + * when the urgent BKOPS bit is set in a R1 command response
>> + * then background operations should be started immediately.
>> +*/
>> +void mmc_start_bkops(struct mmc_card *card)
>> +{
>> + int err;
>> + int timeout;
>> + u8 wait_for_prog_done;
>> +
>> + BUG_ON(!card);
>> + if (!card->ext_csd.bkops_en || !(card->host->caps2& MMC_CAP2_BKOPS))
>> + return;
>> +
>> + if (mmc_card_check_bkops(card)) {
>> + mmc_card_clr_check_bkops(card);
>> + if (mmc_is_exception_event(card, EXT_CSD_URGENT_BKOPS))
>> + if (card->ext_csd.raw_bkops_status)
>> + mmc_card_set_need_bkops(card);
>> + }
>> +
>> + /*
>> + * If card is already doing bkops or need for
>> + * bkops flag is not set, then do nothing just
>> + * return
>> + */
>> + if (mmc_card_doing_bkops(card) || !mmc_card_need_bkops(card))
>> + return;
>> +
>> + mmc_claim_host(card->host);
>> + if (card->ext_csd.raw_bkops_status>= EXT_CSD_BKOPS_LEVEL_2) {
>> + timeout = MMC_BKOPS_MAX_TIMEOUT;
>> + wait_for_prog_done = 1;
>> + } else {
>> + timeout = 0;
>> + wait_for_prog_done = 0;
>> + }
>> +
>> + err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
>> + EXT_CSD_BKOPS_START, 1, timeout, wait_for_prog_done);
>> + if (err) {
>> + pr_warn("%s: error %d starting bkops\n",
>> + mmc_hostname(card->host), err);
>> + mmc_card_clr_need_bkops(card);
>> + goto out;
>> + }
>> +
>> + mmc_card_clr_need_bkops(card);
>> +
>> + /*
>> + * For urgent bkops status (LEVEL_2 and more)
>> + * bkops executed synchronously, otherwise
>> + * the operation is in progress
>> + */
>> + if (card->ext_csd.raw_bkops_status>= EXT_CSD_BKOPS_LEVEL_2)
>> + mmc_card_set_check_bkops(card);
>> + else
>> + mmc_card_set_doing_bkops(card);
>> +
>> +out:
>> + mmc_release_host(card->host);
>> +}
>> +EXPORT_SYMBOL(mmc_start_bkops);
>> +
>> static void mmc_wait_done(struct mmc_request *mrq)
>> {
>> complete(&mrq->completion);
>> @@ -359,12 +443,15 @@ struct mmc_async_req *mmc_start_req(struct mmc_host *host,
>> if (!err&& areq)
>> start_err = __mmc_start_req(host, areq->mrq);
>>
>> - if (host->areq)
>> + if (host->areq) {
>> + if (!areq&& host->areq&& mmc_card_mmc(host->card))
>> + mmc_start_bkops(host->card);
>> mmc_post_req(host, host->areq->mrq, 0);
>> + }
>>
>> /* Cancel a prepared request if it was not started. */
>> if ((err || start_err)&& areq)
>> - mmc_post_req(host, areq->mrq, -EINVAL);
>> + mmc_post_req(host, areq->mrq, -EINVAL);
>>
>> if (err)
>> host->areq = NULL;
>> @@ -480,6 +567,66 @@ int mmc_wait_for_cmd(struct mmc_host *host, struct mmc_command *cmd, int retries
>> EXPORT_SYMBOL(mmc_wait_for_cmd);
>>
>> /**
>> + * mmc_stop_bkops - stop ongoing BKOPS
>> + * @card: MMC card to check BKOPS
>> + *
>> + * Send HPI command to stop ongoing background operations,
>> + * to allow rapid servicing of foreground operations,e.g. read/
>> + * writes. Wait until the card comes out of the programming state
>> + * to avoid errors in servicing read/write requests.
>> + */
>> +int mmc_stop_bkops(struct mmc_card *card)
>> +{
>> + int err = 0;
>> +
>> + BUG_ON(!card);
>> +
>> + err = mmc_interrupt_hpi(card);
>> +
>> + mmc_card_clr_doing_bkops(card);
>
> Here even if mmc_interrupt_hpi() fails, you are clearing the DOING_BKOPS flag which is not correct. Which should clear this flag if HPI issued successfully.
If hpi command is failed, we can consider two case.
1) bkops is already done.
2) send_command error.
I will add the code handled them.
>
>
>
>> +
>> + return err;
>> +}
>> +EXPORT_SYMBOL(mmc_stop_bkops);
>> +
>> +int mmc_read_bkops_status(struct mmc_card *card)
>> +{
>> + int err;
>> + u8 ext_csd[512];
>> +
>> + mmc_claim_host(card->host);
>> + err = mmc_send_ext_csd(card, ext_csd);
>> + mmc_release_host(card->host);
>> + if (err)
>> + return err;
>> +
>> + card->ext_csd.raw_bkops_status = ext_csd[EXT_CSD_BKOPS_STATUS];
>> + card->ext_csd.raw_exception_status = ext_csd[EXT_CSD_EXCEPTION_STATUS];
>> +
>> + return 0;
>> +}
>> +EXPORT_SYMBOL(mmc_read_bkops_status);
>> +
>> +int mmc_is_exception_event(struct mmc_card *card, unsigned int value)
>> +{
>> + int err;
>> +
>> + err = mmc_read_bkops_status(card);
>> + if (err) {
>> + pr_err("%s: Didn't read bkops status : %d\n",
>> + mmc_hostname(card->host), err);
>> + return 0;
>> + }
>> +
>> + /* In eMMC 4.41, R1_EXCEPTION_EVENT is URGENT_BKOPS */
>> + if (card->ext_csd.rev == 5)
>> + return 1;
>> +
>> + return (card->ext_csd.raw_exception_status& value) ? 1 : 0;
>> +}
>> +EXPORT_SYMBOL(mmc_is_exception_event);
>> +
>> +/**
>> * mmc_set_data_timeout - set the timeout for a data command
>> * @data: data phase for command
>> * @card: the MMC card associated with the data transfer
>> @@ -2294,8 +2441,11 @@ int mmc_suspend_host(struct mmc_host *host)
>> mmc_bus_get(host);
>> if (host->bus_ops&& !host->bus_dead) {
>>
>> - if (host->bus_ops->suspend)
>> + if (host->bus_ops->suspend) {
>> + if (mmc_card_doing_bkops(host->card))
>> + mmc_stop_bkops(host->card);
>> err = host->bus_ops->suspend(host);
>> + }
>>
>> if (err == -ENOSYS || !host->bus_ops->resume) {
>> /*
>> @@ -2382,6 +2532,11 @@ int mmc_pm_notify(struct notifier_block *notify_block,
>> switch (mode) {
>> case PM_HIBERNATION_PREPARE:
>> case PM_SUSPEND_PREPARE:
>> + if (host->card&& mmc_card_mmc(host->card)&&
>> + mmc_card_doing_bkops(host->card)) {
>> + mmc_interrupt_hpi(host->card);
>> + mmc_card_clr_doing_bkops(host->card);
>> + }
>>
>> spin_lock_irqsave(&host->lock, flags);
>> host->rescan_disable = 1;
>> diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
>> index 258b203..9e036e5 100644
>> --- a/drivers/mmc/core/mmc.c
>> +++ b/drivers/mmc/core/mmc.c
>> @@ -463,6 +463,24 @@ static int mmc_read_ext_csd(struct mmc_card *card, u8 *ext_csd)
>> }
>>
>> if (card->ext_csd.rev>= 5) {
>> + /* check whether the eMMC card support BKOPS */
>> + if (ext_csd[EXT_CSD_BKOPS_SUPPORT]& 0x1) {
>> + card->ext_csd.bkops = 1;
>> + card->ext_csd.bkops_en = ext_csd[EXT_CSD_BKOPS_EN];
>> + card->ext_csd.raw_bkops_status =
>> + ext_csd[EXT_CSD_BKOPS_STATUS];
>> + if (!card->ext_csd.bkops_en&&
>> + card->host->caps2& MMC_CAP2_INIT_BKOPS) {
>> + err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
>> + EXT_CSD_BKOPS_EN, 1, 0);
>> + if (err)
>> + pr_warn("%s: Enabling BKOPS failed\n",
>> + mmc_hostname(card->host));
>> + else
>> + card->ext_csd.bkops_en = 1;
>> + }
>> + }
>> +
>> /* check whether the eMMC card supports HPI */
>> if (ext_csd[EXT_CSD_HPI_FEATURES]& 0x1) {
>> card->ext_csd.hpi = 1;
>> diff --git a/drivers/mmc/core/mmc_ops.c b/drivers/mmc/core/mmc_ops.c
>> index 69370f4..f0bebd9 100644
>> --- a/drivers/mmc/core/mmc_ops.c
>> +++ b/drivers/mmc/core/mmc_ops.c
>> @@ -367,18 +367,20 @@ int mmc_spi_set_crc(struct mmc_host *host, int use_crc)
>> }
>>
>> /**
>> - * mmc_switch - modify EXT_CSD register
>> + * __mmc_switch - modify EXT_CSD register
>> * @card: the MMC card associated with the data transfer
>> * @set: cmd set values
>> * @index: EXT_CSD register index
>> * @value: value to program into EXT_CSD register
>> * @timeout_ms: timeout (ms) for operation performed by register write,
>> * timeout of zero implies maximum possible timeout
>> + * @wait_for_prod_done: is waiting for program done
>> *
>> * Modifies the EXT_CSD register for selected card.
>> */
>> -int mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value,
>> - unsigned int timeout_ms)
>> +int __mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value,
>> + unsigned int timeout_ms, u8 wait_for_prog_done)
>> +
>> {
>> int err;
>> struct mmc_command cmd = {0};
>> @@ -392,13 +394,23 @@ int mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value,
>> (index<< 16) |
>> (value<< 8) |
>> set;
>> - cmd.flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B | MMC_CMD_AC;
>> +
>> + cmd.flags = MMC_CMD_AC;
>> + if (wait_for_prog_done)
>> + cmd.flags |= MMC_RSP_SPI_R1B | MMC_RSP_R1B;
>> + else
>> + cmd.flags |= MMC_RSP_R1 | MMC_RSP_R1;
>
> is this typo here? did you mean MMC_RSP_SPI_R1 | MMC_RSP_R1 ??
>> +
>> cmd.cmd_timeout_ms = timeout_ms;
>>
>> err = mmc_wait_for_cmd(card->host,&cmd, MMC_CMD_RETRIES);
>> if (err)
>> return err;
>>
>> + /* No need to check card status in case of BKOPS switch*/
>> + if (index == EXT_CSD_BKOPS_START)
>> + return 0;
>> +
>> /* Must check status to be sure of no errors */
>> do {
>> err = mmc_send_status(card,&status);
>> @@ -423,6 +435,13 @@ int mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value,
>>
>> return 0;
>> }
>> +EXPORT_SYMBOL_GPL(__mmc_switch);
>> +
>> +int mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value,
>> + unsigned int timeout_ms)
>> +{
>> + return __mmc_switch(card, set, index, value, timeout_ms, 1);
>> +}
>> EXPORT_SYMBOL_GPL(mmc_switch);
>>
>> int mmc_send_status(struct mmc_card *card, u32 *status)
>> diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h
>> index d76513b..50b3539 100644
>> --- a/include/linux/mmc/card.h
>> +++ b/include/linux/mmc/card.h
>> @@ -76,10 +76,13 @@ struct mmc_ext_csd {
>> bool hpi_en; /* HPI enablebit */
>> bool hpi; /* HPI support bit */
>> unsigned int hpi_cmd; /* cmd used as HPI */
>> + bool bkops; /* background support bit */
>> + bool bkops_en; /* background enable bit */
>> unsigned int data_sector_size; /* 512 bytes or 4KB */
>> unsigned int data_tag_unit_size; /* DATA TAG UNIT size */
>> unsigned int boot_ro_lock; /* ro lock support */
>> bool boot_ro_lockable;
>> + u8 raw_exception_status; /* 53 */
>> u8 raw_partition_support; /* 160 */
>> u8 raw_erased_mem_count; /* 181 */
>> u8 raw_ext_csd_structure; /* 194 */
>> @@ -93,6 +96,7 @@ struct mmc_ext_csd {
>> u8 raw_sec_erase_mult; /* 230 */
>> u8 raw_sec_feature_support;/* 231 */
>> u8 raw_trim_mult; /* 232 */
>> + u8 raw_bkops_status; /* 246 */
>> u8 raw_sectors[4]; /* 212 - 4 bytes */
>>
>> unsigned int feature_support;
>> @@ -225,6 +229,9 @@ struct mmc_card {
>> #define MMC_CARD_REMOVED (1<<7) /* card has been removed */
>> #define MMC_STATE_HIGHSPEED_200 (1<<8) /* card is in HS200 mode */
>> #define MMC_STATE_SLEEP (1<<9) /* card is in sleep state */
>> +#define MMC_STATE_NEED_BKOPS (1<<10) /* card need to do BKOPS */
>> +#define MMC_STATE_DOING_BKOPS (1<<11) /* card is doing BKOPS */
>> +#define MMC_STATE_CHECK_BKOPS (1<<12) /* card need to check BKOPS */
>> unsigned int quirks; /* card quirks */
>> #define MMC_QUIRK_LENIENT_FN0 (1<<0) /* allow SDIO FN0 writes outside of the VS CCCR range */
>> #define MMC_QUIRK_BLKSZ_FOR_BYTE_MODE (1<<1) /* use func->cur_blksize */
>> @@ -391,6 +398,9 @@ static inline void __maybe_unused remove_quirk(struct mmc_card *card, int data)
>> #define mmc_card_ext_capacity(c) ((c)->state& MMC_CARD_SDXC)
>> #define mmc_card_removed(c) ((c)&& ((c)->state& MMC_CARD_REMOVED))
>> #define mmc_card_is_sleep(c) ((c)->state& MMC_STATE_SLEEP)
>> +#define mmc_card_need_bkops(c) ((c)->state& MMC_STATE_NEED_BKOPS)
>> +#define mmc_card_doing_bkops(c) ((c)->state& MMC_STATE_DOING_BKOPS)
>> +#define mmc_card_check_bkops(c) ((c)->state& MMC_STATE_CHECK_BKOPS)
>>
>> #define mmc_card_set_present(c) ((c)->state |= MMC_STATE_PRESENT)
>> #define mmc_card_set_readonly(c) ((c)->state |= MMC_STATE_READONLY)
>> @@ -403,7 +413,13 @@ static inline void __maybe_unused remove_quirk(struct mmc_card *card, int data)
>> #define mmc_card_set_ext_capacity(c) ((c)->state |= MMC_CARD_SDXC)
>> #define mmc_card_set_removed(c) ((c)->state |= MMC_CARD_REMOVED)
>> #define mmc_card_set_sleep(c) ((c)->state |= MMC_STATE_SLEEP)
>> +#define mmc_card_set_need_bkops(c) ((c)->state |= MMC_STATE_NEED_BKOPS)
>> +#define mmc_card_set_doing_bkops(c) ((c)->state |= MMC_STATE_DOING_BKOPS)
>> +#define mmc_card_set_check_bkops(c) ((c)->state |= MMC_STATE_CHECK_BKOPS)
>>
>> +#define mmc_card_clr_need_bkops(c) ((c)->state&= ~MMC_STATE_NEED_BKOPS)
>> +#define mmc_card_clr_doing_bkops(c) ((c)->state&= ~MMC_STATE_DOING_BKOPS)
>> +#define mmc_card_clr_check_bkops(c) ((c)->state&= ~MMC_STATE_CHECK_BKOPS)
>> #define mmc_card_clr_sleep(c) ((c)->state&= ~MMC_STATE_SLEEP)
>> /*
>> * Quirk add/remove for MMC products.
>> diff --git a/include/linux/mmc/core.h b/include/linux/mmc/core.h
>> index 1b431c7..bda3d86 100644
>> --- a/include/linux/mmc/core.h
>> +++ b/include/linux/mmc/core.h
>> @@ -134,6 +134,9 @@ struct mmc_host;
>> struct mmc_card;
>> struct mmc_async_req;
>>
>> +extern int mmc_stop_bkops(struct mmc_card *);
>> +extern int mmc_read_bkops_status(struct mmc_card *);
>> +extern int mmc_is_exception_event(struct mmc_card *, unsigned int);
>> extern struct mmc_async_req *mmc_start_req(struct mmc_host *,
>> struct mmc_async_req *, int *);
>> extern int mmc_interrupt_hpi(struct mmc_card *);
>> @@ -142,6 +145,8 @@ extern int mmc_wait_for_cmd(struct mmc_host *, struct mmc_command *, int);
>> extern int mmc_app_cmd(struct mmc_host *, struct mmc_card *);
>> extern int mmc_wait_for_app_cmd(struct mmc_host *, struct mmc_card *,
>> struct mmc_command *, int);
>> +extern void mmc_start_bkops(struct mmc_card *card);
>> +extern int __mmc_switch(struct mmc_card *, u8, u8, u8, unsigned int, u8);
>> extern int mmc_switch(struct mmc_card *, u8, u8, u8, unsigned int);
>>
>> #define MMC_ERASE_ARG 0x00000000
>> diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
>> index 0707d22..d23caf2 100644
>> --- a/include/linux/mmc/host.h
>> +++ b/include/linux/mmc/host.h
>> @@ -238,6 +238,8 @@ struct mmc_host {
>> #define MMC_CAP2_BROKEN_VOLTAGE (1<< 7) /* Use the broken voltage */
>> #define MMC_CAP2_DETECT_ON_ERR (1<< 8) /* On I/O err check card removal */
>> #define MMC_CAP2_HC_ERASE_SZ (1<< 9) /* High-capacity erase size */
>> +#define MMC_CAP2_INIT_BKOPS (1<< 10) /* To enable BKOPS */
>> +#define MMC_CAP2_BKOPS (1<< 11) /* BKOPS supported */
>>
>> mmc_pm_flag_t pm_caps; /* supported pm features */
>> unsigned int power_notify_type;
>> diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h
>> index d425cab..80cfbf1 100644
>> --- a/include/linux/mmc/mmc.h
>> +++ b/include/linux/mmc/mmc.h
>> @@ -139,6 +139,7 @@ static inline bool mmc_op_multi(u32 opcode)
>> #define R1_CURRENT_STATE(x) ((x& 0x00001E00)>> 9) /* sx, b (4 bits) */
>> #define R1_READY_FOR_DATA (1<< 8) /* sx, a */
>> #define R1_SWITCH_ERROR (1<< 7) /* sx, c */
>> +#define R1_EXCEPTION_EVENT (1<< 6) /* sx, a */
>> #define R1_APP_CMD (1<< 5) /* sr, c */
>>
>> #define R1_STATE_IDLE 0
>> @@ -274,12 +275,15 @@ struct _mmc_csd {
>> #define EXT_CSD_FLUSH_CACHE 32 /* W */
>> #define EXT_CSD_CACHE_CTRL 33 /* R/W */
>> #define EXT_CSD_POWER_OFF_NOTIFICATION 34 /* R/W */
>> +#define EXT_CSD_EXCEPTION_STATUS 54 /* RO */
>> #define EXT_CSD_DATA_SECTOR_SIZE 61 /* R */
>> #define EXT_CSD_GP_SIZE_MULT 143 /* R/W */
>> #define EXT_CSD_PARTITION_ATTRIBUTE 156 /* R/W */
>> #define EXT_CSD_PARTITION_SUPPORT 160 /* RO */
>> #define EXT_CSD_HPI_MGMT 161 /* R/W */
>> #define EXT_CSD_RST_N_FUNCTION 162 /* R/W */
>> +#define EXT_CSD_BKOPS_EN 163 /* R/W */
>> +#define EXT_CSD_BKOPS_START 164 /* W */
>> #define EXT_CSD_SANITIZE_START 165 /* W */
>> #define EXT_CSD_WR_REL_PARAM 166 /* RO */
>> #define EXT_CSD_BOOT_WP 173 /* R/W */
>> @@ -313,11 +317,13 @@ struct _mmc_csd {
>> #define EXT_CSD_PWR_CL_200_360 237 /* RO */
>> #define EXT_CSD_PWR_CL_DDR_52_195 238 /* RO */
>> #define EXT_CSD_PWR_CL_DDR_52_360 239 /* RO */
>> +#define EXT_CSD_BKOPS_STATUS 246 /* RO */
>> #define EXT_CSD_POWER_OFF_LONG_TIME 247 /* RO */
>> #define EXT_CSD_GENERIC_CMD6_TIME 248 /* RO */
>> #define EXT_CSD_CACHE_SIZE 249 /* RO, 4 bytes */
>> #define EXT_CSD_TAG_UNIT_SIZE 498 /* RO */
>> #define EXT_CSD_DATA_TAG_SUPPORT 499 /* RO */
>> +#define EXT_CSD_BKOPS_SUPPORT 502 /* RO */
>> #define EXT_CSD_HPI_FEATURES 503 /* RO */
>>
>> /*
>> @@ -386,4 +392,17 @@ struct _mmc_csd {
>> #define MMC_SWITCH_MODE_CLEAR_BITS 0x02 /* Clear bits which are 1 in value */
>> #define MMC_SWITCH_MODE_WRITE_BYTE 0x03 /* Set target to value */
>>
>> +/*
>> + * BKOPS status level
>> + */
>> +#define EXT_CSD_BKOPS_LEVEL_2 0x2
>> +
>> +/*
>> + * EXCEPTION_EVENT_STATUS field (eMMC4.5)
>> + */
>> +#define EXT_CSD_URGENT_BKOPS BIT(0)
>> +#define EXT_CSD_DYNCAP_NEEDED BIT(1)
>> +#define EXT_CSD_SYSPOOL_EXHAUSTED BIT(2)
>> +#define EXT_CSD_PACKED_FAILURE BIT(3)
>> +
>> #endif /* LINUX_MMC_MMC_H */
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
