[PATCH] mmc: tmio: Don't access hardware registers after stopping clocks

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The tmio_mmc_set_ios() function configures the MMC power, clock and bus
width. When the MMC controller gets powered off, runtime PM switches the
MSTP clock off. Writing to to CTL_SD_MEM_CARD_OPT register afterwards
fails and prints an error message to the kernel log.

As configuring the bus width is pointless when the interface gets
powered down, skip the operation when power is off.

Signed-off-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
---
 drivers/mmc/host/tmio_mmc_pio.c |   16 +++++++++-------
 1 files changed, 9 insertions(+), 7 deletions(-)

diff --git a/drivers/mmc/host/tmio_mmc_pio.c b/drivers/mmc/host/tmio_mmc_pio.c
index 9a7996a..de1226d 100644
--- a/drivers/mmc/host/tmio_mmc_pio.c
+++ b/drivers/mmc/host/tmio_mmc_pio.c
@@ -816,13 +816,15 @@ static void tmio_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 		tmio_mmc_clk_stop(host);
 	}
 
-	switch (ios->bus_width) {
-	case MMC_BUS_WIDTH_1:
-		sd_ctrl_write16(host, CTL_SD_MEM_CARD_OPT, 0x80e0);
-	break;
-	case MMC_BUS_WIDTH_4:
-		sd_ctrl_write16(host, CTL_SD_MEM_CARD_OPT, 0x00e0);
-	break;
+	if (host->power) {
+		switch (ios->bus_width) {
+		case MMC_BUS_WIDTH_1:
+			sd_ctrl_write16(host, CTL_SD_MEM_CARD_OPT, 0x80e0);
+		break;
+		case MMC_BUS_WIDTH_4:
+			sd_ctrl_write16(host, CTL_SD_MEM_CARD_OPT, 0x00e0);
+		break;
+		}
 	}
 
 	/* Let things settle. delay taken from winCE driver */
-- 
1.7.3.4

--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux