Commit b01a4f1c (mmc: omap: convert to per instance workqueue) initializes
the workqueue too late causing the following:
Unable to handle kernel NULL pointer dereference at virtual address 00000000
pgd = c0004000
[00000000] *pgd=00000000
Internal error: Oops: 5 [#1] SMP ARM
Modules linked in:
CPU: 0 Not tainted (3.4.0-08218-gb48b2c3 #158)
PC is at __queue_work+0x8/0x46c
LR is at queue_work_on+0x38/0x40
pc : [<c005bb4c>] lr : [<c005c00c>] psr: 60000193
sp : c0691e1c ip : 00000000 fp : c07374ac
r10: c7aae400 r9 : c0395700 r8 : 00000100
r7 : c0691e70 r6 : 00000000 r5 : 00000000 r4 : c7aae440
r3 : 00000001 r2 : c7aae440 r1 : 00000000 r0 : 00000000
Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kernel
Control: 00c5387d Table: 80004000 DAC: 00000017
Process swapper/0 (pid: 0, stack limit = 0xc06902f8)
Stack: (0xc0691e1c to 0xc0692000)
Fix this by initializing the workqueue before mmc_omap_remove_slot()
get called. Tested on n770, looks like n800 at least still has some
other issue with MMC.
Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx>
--- a/drivers/mmc/host/omap.c
+++ b/drivers/mmc/host/omap.c
@@ -1485,24 +1485,27 @@ static int __devinit mmc_omap_probe(struct platform_device *pdev)
}
host->nr_slots = pdata->nr_slots;
+
+ host->mmc_omap_wq = alloc_workqueue("mmc_omap", 0, 0);
+ if (!host->mmc_omap_wq)
+ goto err_plat_cleanup;
+
for (i = 0; i < pdata->nr_slots; i++) {
ret = mmc_omap_new_slot(host, i);
if (ret < 0) {
while (--i >= 0)
mmc_omap_remove_slot(host->slots[i]);
- goto err_plat_cleanup;
+ goto err_destroy_wq;
}
}
host->reg_shift = (cpu_is_omap7xx() ? 1 : 2);
- host->mmc_omap_wq = alloc_workqueue("mmc_omap", 0, 0);
- if (!host->mmc_omap_wq)
- goto err_plat_cleanup;
-
return 0;
+err_destroy_wq:
+ destroy_workqueue(host->mmc_omap_wq);
err_plat_cleanup:
if (pdata->cleanup)
pdata->cleanup(&pdev->dev);
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
