Every time the clockc is enabled after possibly being disabled, we have to re-read its frequency and update our configuration. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@xxxxxx> --- drivers/mmc/host/tmio_mmc_pio.c | 35 ++++++++++++++++++++++++++++++++--- include/linux/mfd/tmio.h | 3 +++ 2 files changed, 35 insertions(+), 3 deletions(-) diff --git a/drivers/mmc/host/tmio_mmc_pio.c b/drivers/mmc/host/tmio_mmc_pio.c index 8cd3637..579f990 100644 --- a/drivers/mmc/host/tmio_mmc_pio.c +++ b/drivers/mmc/host/tmio_mmc_pio.c @@ -751,6 +751,22 @@ fail: mmc_request_done(mmc, mrq); } +static int tmio_mmc_clk_update(struct mmc_host *mmc) +{ + struct tmio_mmc_host *host = mmc_priv(mmc); + struct tmio_mmc_data *pdata = host->pdata; + int ret; + + if (!pdata->clk_enable) + return -ENOTSUPP; + + ret = pdata->clk_enable(host->pdev, &mmc->f_max); + if (!ret) + mmc->f_min = mmc->f_max / 512; + + return ret; +} + /* Set MMC clock / power. * Note: This controller uses a simple divider scheme therefore it cannot * run a MMC card at full speed (20MHz). The max clock is 24MHz on SD, but as @@ -797,6 +813,7 @@ static void tmio_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) */ if (ios->power_mode == MMC_POWER_ON && ios->clock) { if (!host->power) { + tmio_mmc_clk_update(mmc); pm_runtime_get_sync(dev); host->power = true; } @@ -811,8 +828,11 @@ static void tmio_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) host->set_pwr(host->pdev, 0); tmio_mmc_clk_stop(host); if (host->power) { + struct tmio_mmc_data *pdata = host->pdata; host->power = false; pm_runtime_put(dev); + if (pdata->clk_disable) + pdata->clk_disable(host->pdev); } } @@ -904,8 +924,6 @@ int __devinit tmio_mmc_host_probe(struct tmio_mmc_host **host, mmc->ops = &tmio_mmc_ops; mmc->caps = MMC_CAP_4_BIT_DATA | pdata->capabilities; - mmc->f_max = pdata->hclk; - mmc->f_min = mmc->f_max / 512; mmc->max_segs = 32; mmc->max_blk_size = 512; mmc->max_blk_count = (PAGE_CACHE_SIZE / mmc->max_blk_size) * @@ -927,6 +945,11 @@ int __devinit tmio_mmc_host_probe(struct tmio_mmc_host **host, if (ret < 0) goto pm_disable; + if (tmio_mmc_clk_update(mmc) < 0) { + mmc->f_max = pdata->hclk; + mmc->f_min = mmc->f_max / 512; + } + /* * There are 4 different scenarios for the card detection: * 1) an external gpio irq handles the cd (best for power savings) @@ -972,7 +995,13 @@ int __devinit tmio_mmc_host_probe(struct tmio_mmc_host **host, /* See if we also get DMA */ tmio_mmc_request_dma(_host, pdata); - mmc_add_host(mmc); + ret = mmc_add_host(mmc); + if (pdata->clk_disable) + pdata->clk_disable(pdev); + if (ret < 0) { + tmio_mmc_host_remove(_host); + return ret; + } dev_pm_qos_expose_latency_limit(&pdev->dev, 100); diff --git a/include/linux/mfd/tmio.h b/include/linux/mfd/tmio.h index f5171db..b332c4c 100644 --- a/include/linux/mfd/tmio.h +++ b/include/linux/mfd/tmio.h @@ -110,6 +110,9 @@ struct tmio_mmc_data { void (*set_clk_div)(struct platform_device *host, int state); int (*get_cd)(struct platform_device *host); int (*write16_hook)(struct tmio_mmc_host *host, int addr); + /* clock management callbacks */ + int (*clk_enable)(struct platform_device *pdev, unsigned int *f); + void (*clk_disable)(struct platform_device *pdev); }; /* -- 1.7.2.5 -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html