From: "Torne (Richard Coles)" <torne@xxxxxxxxxx>
MMC CSD info can specify very large, ridiculous timeouts, big enough to
overflow timeout_ns on 32-bit machines. This can result in the card
timing out on every operation because the wrapped timeout value is far
too small.
Fix the overflow by calculating the timeout in microseconds first and
capping the result at 2 seconds. Cards specifying longer timeouts are
almost certainly insane, and host controllers generally cannot support
timeouts that long in any case.
2 seconds should be plenty of time for any card to actually function;
the timeout calculation code is already using 1 second as a "worst case"
timeout for cards running in SPI mode.
Signed-off-by: Torne (Richard Coles) <torne@xxxxxxxxxx>
---
drivers/mmc/core/core.c | 18 ++++++++++++++----
1 files changed, 14 insertions(+), 4 deletions(-)
diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index ba821fe..368452e 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -488,7 +488,7 @@ EXPORT_SYMBOL(mmc_wait_for_cmd);
*/
void mmc_set_data_timeout(struct mmc_data *data, const struct mmc_card *card)
{
- unsigned int mult;
+ unsigned int mult, timeout_us;
/*
* SDIO cards only define an upper 1 s limit on access.
@@ -511,16 +511,26 @@ void mmc_set_data_timeout(struct mmc_data *data, const struct mmc_card *card)
if (data->flags & MMC_DATA_WRITE)
mult <<= card->csd.r2w_factor;
- data->timeout_ns = card->csd.tacc_ns * mult;
+ /*
+ * The timeout in nanoseconds may overflow, so calculate it in
+ * microseconds first. Cap it at two seconds both to avoid the overflow
+ * and also because host controllers cannot generally generate timeouts
+ * that long anyway.
+ */
+ timeout_us = (card->csd.tacc_ns / 1000) * mult;
+ if (timeout_us < 2000000)
+ data->timeout_ns = card->csd.tacc_ns * mult;
+ else
+ data->timeout_ns = 2000000000;
+
data->timeout_clks = card->csd.tacc_clks * mult;
/*
* SD cards also have an upper limit on the timeout.
*/
if (mmc_card_sd(card)) {
- unsigned int timeout_us, limit_us;
+ unsigned int limit_us;
- timeout_us = data->timeout_ns / 1000;
if (mmc_host_clk_rate(card->host))
timeout_us += data->timeout_clks * 1000 /
(mmc_host_clk_rate(card->host) / 1000);
--
1.7.7.3
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
