Re: [PATCH 02/10] mmc: mxs-mmc: let ssp_is_old take host as parameter

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Dear Shawn Guo,

> Let macro ssp_is_old take host as parameter to make the code easy
> to read.
> 
> Signed-off-by: Shawn Guo <shawn.guo@xxxxxxxxxx>
> ---
>  drivers/mmc/host/mxs-mmc.c |   59
> ++++++++++++++++++++++--------------------- 1 files changed, 30
> insertions(+), 29 deletions(-)
> 
> diff --git a/drivers/mmc/host/mxs-mmc.c b/drivers/mmc/host/mxs-mmc.c
> index 2ea5361..13907e4 100644
> --- a/drivers/mmc/host/mxs-mmc.c
> +++ b/drivers/mmc/host/mxs-mmc.c
> @@ -51,7 +51,7 @@
>  #define MXS_MMC_DETECT_TIMEOUT			(HZ/2)
> 
>  #define SSP_VERSION_LATEST	4
> -#define ssp_is_old()		(host->version < SSP_VERSION_LATEST)
> +#define ssp_is_old(host)	(host->version < SSP_VERSION_LATEST)

(host)->version ... to make the macro safer.

> 
>  /* SSP registers */
>  #define HW_SSP_CTRL0				0x000
> @@ -86,14 +86,14 @@
>  #define  BM_SSP_BLOCK_SIZE_BLOCK_COUNT		(0xffffff << 4)
>  #define  BP_SSP_BLOCK_SIZE_BLOCK_SIZE		(0)
>  #define  BM_SSP_BLOCK_SIZE_BLOCK_SIZE		(0xf)
> -#define HW_SSP_TIMING				(ssp_is_old() ? 0x050 : 
0x070)
> +#define HW_SSP_TIMING(h)			(ssp_is_old(h) ? 0x050 : 0x070)
>  #define  BP_SSP_TIMING_TIMEOUT			(16)
>  #define  BM_SSP_TIMING_TIMEOUT			(0xffff << 16)
>  #define  BP_SSP_TIMING_CLOCK_DIVIDE		(8)
>  #define  BM_SSP_TIMING_CLOCK_DIVIDE		(0xff << 8)
>  #define  BP_SSP_TIMING_CLOCK_RATE		(0)
>  #define  BM_SSP_TIMING_CLOCK_RATE		(0xff)
> -#define HW_SSP_CTRL1				(ssp_is_old() ? 0x060 : 0x080)
> +#define HW_SSP_CTRL1(h)				(ssp_is_old(h) ? 0x060 : 
0x080)
>  #define  BM_SSP_CTRL1_SDIO_IRQ			(1 << 31)
>  #define  BM_SSP_CTRL1_SDIO_IRQ_EN		(1 << 30)
>  #define  BM_SSP_CTRL1_RESP_ERR_IRQ		(1 << 29)
> @@ -116,11 +116,11 @@
>  #define  BM_SSP_CTRL1_WORD_LENGTH		(0xf << 4)
>  #define  BP_SSP_CTRL1_SSP_MODE			(0)
>  #define  BM_SSP_CTRL1_SSP_MODE			(0xf)
> -#define HW_SSP_SDRESP0				(ssp_is_old() ? 0x080 : 
0x0a0)
> -#define HW_SSP_SDRESP1				(ssp_is_old() ? 0x090 : 
0x0b0)
> -#define HW_SSP_SDRESP2				(ssp_is_old() ? 0x0a0 : 
0x0c0)
> -#define HW_SSP_SDRESP3				(ssp_is_old() ? 0x0b0 : 
0x0d0)
> -#define HW_SSP_STATUS				(ssp_is_old() ? 0x0c0 : 
0x100)
> +#define HW_SSP_SDRESP0(h)			(ssp_is_old(h) ? 0x080 : 0x0a0)
> +#define HW_SSP_SDRESP1(h)			(ssp_is_old(h) ? 0x090 : 0x0b0)
> +#define HW_SSP_SDRESP2(h)			(ssp_is_old(h) ? 0x0a0 : 0x0c0)
> +#define HW_SSP_SDRESP3(h)			(ssp_is_old(h) ? 0x0b0 : 0x0d0)
> +#define HW_SSP_STATUS(h)			(ssp_is_old(h) ? 0x0c0 : 0x100)
>  #define  BM_SSP_STATUS_CARD_DETECT		(1 << 28)
>  #define  BM_SSP_STATUS_SDIO_IRQ			(1 << 17)
>  #define HW_SSP_VERSION				(cpu_is_mx23() ? 0x110 : 
0x130)
> @@ -183,7 +183,7 @@ static int mxs_mmc_get_cd(struct mmc_host *mmc)
>  {
>  	struct mxs_mmc_host *host = mmc_priv(mmc);
> 
> -	return !(readl(host->base + HW_SSP_STATUS) &
> +	return !(readl(host->base + HW_SSP_STATUS(host)) &
>  		 BM_SSP_STATUS_CARD_DETECT);
>  }
> 
> @@ -207,7 +207,7 @@ static void mxs_mmc_reset(struct mxs_mmc_host *host)
>  	writel(BF_SSP(0xffff, TIMING_TIMEOUT) |
>  	       BF_SSP(2, TIMING_CLOCK_DIVIDE) |
>  	       BF_SSP(0, TIMING_CLOCK_RATE),
> -	       host->base + HW_SSP_TIMING);
> +	       host->base + HW_SSP_TIMING(host));
> 
>  	if (host->sdio_irq_en) {
>  		ctrl0 |= BM_SSP_CTRL0_SDIO_IRQ_CHECK;
> @@ -215,7 +215,7 @@ static void mxs_mmc_reset(struct mxs_mmc_host *host)
>  	}
> 
>  	writel(ctrl0, host->base + HW_SSP_CTRL0);
> -	writel(ctrl1, host->base + HW_SSP_CTRL1);
> +	writel(ctrl1, host->base + HW_SSP_CTRL1(host));
>  }
> 
>  static void mxs_mmc_start_cmd(struct mxs_mmc_host *host,
> @@ -229,12 +229,12 @@ static void mxs_mmc_request_done(struct mxs_mmc_host
> *host)
> 
>  	if (mmc_resp_type(cmd) & MMC_RSP_PRESENT) {
>  		if (mmc_resp_type(cmd) & MMC_RSP_136) {
> -			cmd->resp[3] = readl(host->base + HW_SSP_SDRESP0);
> -			cmd->resp[2] = readl(host->base + HW_SSP_SDRESP1);
> -			cmd->resp[1] = readl(host->base + HW_SSP_SDRESP2);
> -			cmd->resp[0] = readl(host->base + HW_SSP_SDRESP3);
> +			cmd->resp[3] = readl(host->base + HW_SSP_SDRESP0(host));
> +			cmd->resp[2] = readl(host->base + HW_SSP_SDRESP1(host));
> +			cmd->resp[1] = readl(host->base + HW_SSP_SDRESP2(host));
> +			cmd->resp[0] = readl(host->base + HW_SSP_SDRESP3(host));
>  		} else {
> -			cmd->resp[0] = readl(host->base + HW_SSP_SDRESP0);
> +			cmd->resp[0] = readl(host->base + HW_SSP_SDRESP0(host));
>  		}
>  	}
> 
> @@ -277,11 +277,11 @@ static irqreturn_t mxs_mmc_irq_handler(int irq, void
> *dev_id)
> 
>  	spin_lock(&host->lock);
> 
> -	stat = readl(host->base + HW_SSP_CTRL1);
> +	stat = readl(host->base + HW_SSP_CTRL1(host));
>  	writel(stat & MXS_MMC_IRQ_BITS,
> -	       host->base + HW_SSP_CTRL1 + STMP_OFFSET_REG_CLR);
> +	       host->base + HW_SSP_CTRL1(host) + STMP_OFFSET_REG_CLR);
> 
> -	if ((stat & BM_SSP_CTRL1_SDIO_IRQ) && (stat & BM_SSP_CTRL1_SDIO_IRQ_EN))
> +	if ((sta & BM_SSP_CTRL1_SDIO_IRQ) && (stat & BM_SSP_CTRL1_SDIO_IRQ_EN))

^ s/sta/stat/ ... did you try compiling this at all ? :-)

>  		mmc_signal_sdio_irq(host->mmc);
> 
>  	spin_unlock(&host->lock);
> @@ -485,7 +485,7 @@ static void mxs_mmc_adtc(struct mxs_mmc_host *host)
>  		blocks = 1;
> 
>  	/* xfer count, block size and count need to be set differently */
> -	if (ssp_is_old()) {
> +	if (ssp_is_old(host)) {
>  		ctrl0 |= BF_SSP(data_size, CTRL0_XFER_COUNT);
>  		cmd0 |= BF_SSP(log2_blksz, CMD0_BLOCK_SIZE) |
>  			BF_SSP(blocks - 1, CMD0_BLOCK_COUNT);
> @@ -509,10 +509,10 @@ static void mxs_mmc_adtc(struct mxs_mmc_host *host)
> 
>  	/* set the timeout count */
>  	timeout = mxs_ns_to_ssp_ticks(host->clk_rate, data->timeout_ns);
> -	val = readl(host->base + HW_SSP_TIMING);
> +	val = readl(host->base + HW_SSP_TIMING(host));
>  	val &= ~(BM_SSP_TIMING_TIMEOUT);
>  	val |= BF_SSP(timeout, TIMING_TIMEOUT);
> -	writel(val, host->base + HW_SSP_TIMING);
> +	writel(val, host->base + HW_SSP_TIMING(host));
> 
>  	/* pio */
>  	host->ssp_pio_words[0] = ctrl0;
> @@ -598,11 +598,11 @@ static void mxs_mmc_set_clk_rate(struct mxs_mmc_host
> *host, unsigned int rate)
> 
>  	ssp_sck = ssp_clk / clock_divide / (1 + clock_rate);
> 
> -	val = readl(host->base + HW_SSP_TIMING);
> +	val = readl(host->base + HW_SSP_TIMING(host));
>  	val &= ~(BM_SSP_TIMING_CLOCK_DIVIDE | BM_SSP_TIMING_CLOCK_RATE);
>  	val |= BF_SSP(clock_divide, TIMING_CLOCK_DIVIDE);
>  	val |= BF_SSP(clock_rate, TIMING_CLOCK_RATE);
> -	writel(val, host->base + HW_SSP_TIMING);
> +	writel(val, host->base + HW_SSP_TIMING(host));
> 
>  	host->clk_rate = ssp_sck;
> 
> @@ -639,16 +639,17 @@ static void mxs_mmc_enable_sdio_irq(struct mmc_host
> *mmc, int enable) writel(BM_SSP_CTRL0_SDIO_IRQ_CHECK,
>  		       host->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_SET);
>  		writel(BM_SSP_CTRL1_SDIO_IRQ_EN,
> -		       host->base + HW_SSP_CTRL1 + STMP_OFFSET_REG_SET);
> +		       host->base + HW_SSP_CTRL1(host) + STMP_OFFSET_REG_SET);
> 
> -		if (readl(host->base + HW_SSP_STATUS) & BM_SSP_STATUS_SDIO_IRQ)
> +		if (readl(host->base + HW_SSP_STATUS(host)) &
> +				BM_SSP_STATUS_SDIO_IRQ)
>  			mmc_signal_sdio_irq(host->mmc);
> 
>  	} else {
>  		writel(BM_SSP_CTRL0_SDIO_IRQ_CHECK,
>  		       host->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_CLR);
>  		writel(BM_SSP_CTRL1_SDIO_IRQ_EN,
> -		       host->base + HW_SSP_CTRL1 + STMP_OFFSET_REG_CLR);
> +		       host->base + HW_SSP_CTRL1(host) + STMP_OFFSET_REG_CLR);
>  	}
> 
>  	spin_unlock_irqrestore(&host->lock, flags);
> @@ -765,8 +766,8 @@ static int mxs_mmc_probe(struct platform_device *pdev)
> 
>  	mmc->max_segs = 52;
>  	mmc->max_blk_size = 1 << 0xf;
> -	mmc->max_blk_count = (ssp_is_old()) ? 0xff : 0xffffff;
> -	mmc->max_req_size = (ssp_is_old()) ? 0xffff : 0xffffffff;
> +	mmc->max_blk_count = (ssp_is_old(host)) ? 0xff : 0xffffff;
> +	mmc->max_req_size = (ssp_is_old(host)) ? 0xffff : 0xffffffff;
>  	mmc->max_seg_size = dma_get_max_seg_size(host->dmach->device->dev);
> 
>  	platform_set_drvdata(pdev, mmc);
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux