The call to pm_runtime_put() in tmio-mmc's .set_ios() method can switch
off the supplying clock or even power down the whole unit. Therefore,
calling tmio_mmc_clk_stop() after that can be redundant, put it before.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
---
drivers/mmc/host/tmio_mmc_pio.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/drivers/mmc/host/tmio_mmc_pio.c b/drivers/mmc/host/tmio_mmc_pio.c
index 9a7996a..0d2643b 100644
--- a/drivers/mmc/host/tmio_mmc_pio.c
+++ b/drivers/mmc/host/tmio_mmc_pio.c
@@ -809,11 +809,11 @@ static void tmio_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
} else if (ios->power_mode != MMC_POWER_UP) {
if (host->set_pwr && ios->power_mode == MMC_POWER_OFF)
host->set_pwr(host->pdev, 0);
+ tmio_mmc_clk_stop(host);
if (host->power) {
host->power = false;
pm_runtime_put(dev);
}
- tmio_mmc_clk_stop(host);
}
switch (ios->bus_width) {
--
1.7.2.5
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
