>From the original version of sh_mmcif the .set_pwr() callback has only been used to turn the card's power on, and the .down_pwr() callback has been used to turn it off. .set_pwr() can be used for both these tasks, which is also how it is implemented by the only user of this API: the SH7724 ecovec board. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@xxxxxx> --- drivers/mmc/host/sh_mmcif.c | 4 ++-- 1 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/mmc/host/sh_mmcif.c b/drivers/mmc/host/sh_mmcif.c index ed59392..19c7576 100644 --- a/drivers/mmc/host/sh_mmcif.c +++ b/drivers/mmc/host/sh_mmcif.c @@ -957,8 +957,8 @@ static void sh_mmcif_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) pm_runtime_put(&host->pd->dev); clk_disable(host->hclk); host->power = false; - if (p->down_pwr && ios->power_mode == MMC_POWER_OFF) - p->down_pwr(host->pd); + if (p->set_pwr && ios->power_mode == MMC_POWER_OFF) + p->set_pwr(host->pd, 0); } host->state = STATE_IDLE; return; -- 1.7.2.5 -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
