Re: [RFC 0/8] DMA engine conversion

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Monday 23 April 2012 06:02 PM, Shilimkar, Santosh wrote:
>> conversion process is fairly straight forward - it's more or less:
>> > 1. add struct dma_chan * pointer to the private structure.
>> > 2. add allocation/freeing functions for the DMA engine channels.
>> > 3. convert the callbacks to match the DMA engine callback prototype.
>> > 4. add code to set the DMA engine channel configuration appropriately
>> >   (avoiding any unnecessary calls) via dmaengine_slave_config().
>> > 5. add code to queue the transfer via dmaengine_prep_slave_sg() and
>> >   dmaengine_submit().
>> > 6. omap_start_dma() becomes dma_async_issue_pending().
>> >
>> >  drivers/spi/spi-omap2-mcspi.c |  186 +++++++++++++++++++++++++++++++++-------
>> >  1 files changed, 153 insertions(+), 33 deletions(-)
> The patch seems to be fine to me.
>
> Am looping Shubro in case he has any comment on "why element sync was used ?"
> and also to test the patch with more peripherals connected over SPI.
>
> Regards
> Santosh
Tested on omap4 ethernet and omap3 touchscreen
also did a spidev test.

Tested-by: Shubhrajyoti <shubhrajyoti@xxxxxx <mailto:shubhrajyoti@xxxxxx>>
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux