Hi Chris
On 4/19/2012 7:19 PM, Chris Ball wrote:
> Hi Giuseppe,
>
> On Thu, Apr 19 2012, Giuseppe CAVALLARO wrote:
>> This adds a new option to enable the boot from eMMC
>> by writing to the 179 ext_csd register.
>>
>> The example below shows as to enable the mmcblk0boot0
>> partition and also set/reset the ACK bit).
>>
>> $ ./mmc booten 1 1 /dev/mmcblk0boot0
>> $ ./mmc extcsd read /dev/mmcblk0boot0 | grep PARTITION_CON
>> Boot configuration bytes [PARTITION_CONFIG: 0x49]
>>
>> Reported-by: Youssef TRIKI <youssef.triki@xxxxxx>
>> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@xxxxxx>
>
> Looks good, thanks -- do you mind if I make the following changes for
> readability (and are they correct)? I can update the commit message too:
your changes are fine for me
thanks a lot
Regards
Peppe
>
> diff --git a/mmc.c b/mmc.c
> index c295885..6927b70 100644
> --- a/mmc.c
> +++ b/mmc.c
> @@ -66,8 +66,8 @@ static struct Command commands[] = {
> NULL
> },
> { do_write_boot_en, -3,
> - "booten", "<boot_partition> " "<ack> " "<device>\n"
> - "Enable the boot partition for the <device>.",
> + "bootpart enable", "<boot_partition> " "<send_ack> " "<device>\n"
> + "Enable the boot partition for the <device>.\nTo receive acknowledgment of boot from the card set <send_ack>\nto 1, else set it to 0.",
> NULL
> },
> { 0, 0, 0, 0 }
> diff --git a/mmc_cmds.c b/mmc_cmds.c
> index f588b17..2ab4185 100644
> --- a/mmc_cmds.c
> +++ b/mmc_cmds.c
> @@ -174,13 +174,18 @@ int do_write_boot_en(int nargs, char **argv)
> __u8 value = 0;
> int fd, ret;
> char *device;
> - int boot_area, ack;
> + int boot_area, send_ack;
>
> - CHECK(nargs != 4, "Usage: mmc booten <partition_number> "
> - "<ack> </path/to/mmcblkX>\n", exit(1));
> + CHECK(nargs != 4, "Usage: mmc bootpart enable <partition_number> "
> + "<send_ack> </path/to/mmcblkX>\n", exit(1));
>
> + /*
> + * If <send_ack> is 1, the device will send acknowledgment
> + * pattern "010" to the host when boot operation begins.
> + * If <send_ack> is 0, it won't.
> + */
> boot_area = strtol(argv[1], NULL, 10);
> - ack = strtol(argv[2], NULL, 10);
> + send_ack = strtol(argv[2], NULL, 10);
> device = argv[3];
>
> fd = open(device, O_RDWR);
> @@ -214,7 +219,7 @@ int do_write_boot_en(int nargs, char **argv)
> fprintf(stderr, "Cannot enable the boot area\n");
> exit(1);
> }
> - if (ack)
> + if (send_ack)
> value |= EXT_CSD_PART_CONFIG_ACC_ACK;
> else
> value &= ~EXT_CSD_PART_CONFIG_ACC_ACK;
>
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
