Hello Tushar, On Thu, 12 Apr 2012, Tushar Behera wrote: > With this patch, I continuously get following message on my console. > (Tested on Origen board, based on EXYNOS4210). > > mmc0: Too large timeout requested for CMD25! > > So, with this change, should we update sdhci_calc_timeout() also? Looks like most of the host drivers that range-check the timeout value silently clamp it at the hardware-supported maximum value: drivers/mmc/host/atmel-mci.c drivers/mmc/host/davinci_mmc.c drivers/mmc/host/mvsdio.c drivers/mmc/host/omap_hsmmc.c drivers/mmc/host/wbsd.c drivers/mmc/host/tifm_sd.c So maybe try the same thing for your driver? Of course it seems that some drivers don't range-check the timeout value at all :-( drivers/mmc/host/bfin_sdh.c drivers/mmc/host/mmci.c drivers/mmc/host/msm_sdcc.c drivers/mmc/host/pxamci.c drivers/mmc/host/mxs-mmc.c drivers/mmc/host/omap.c - Paul -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
