Re: [PATCH v2] mmc: core: eMMC in Sleep mode before suspend

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Apr 12, 2012 at 9:54 AM, Chris Ball <cjb@xxxxxxxxxx> wrote:
> Hi,
>
> On Thu, Sep 08 2011, Balaji T K wrote:
>> Put MMC to sleep if it supports SLEEP/AWAKE (CMD5)
>> in the mmc suspend so that Vcc (NAND core) can be cut
>> to minimize power consumption.
>> eMMC put into SLEEP can respond to CMD0 or H/W reset or CMD5.
>> Current implemention on resume from suspend relies on CMD0 in
>> mmc_init_card to get out of SLEEP mode.
>>
>> Signed-off-by: Balaji T K <balajitk@xxxxxx>
>> Acked-by: Venkatraman S <svenkatr@xxxxxx>
>
> I've just tried this on an eMMC 4.41 device (Sandisk SEM04G) with
> sdhci-pxav3, and it resulted in a crash on the way into suspend:
>
> [   18.379192] PM: Syncing filesystems ... done.
> [   18.423866] Freezing user space processes ... (elapsed 0.01 seconds) done.
> [   18.446542] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
> [   18.549586] PM: Device sdhci-pxav3.2 failed to suspend: error -110
> [   18.583808] PM: Some devices failed to suspend
> [   22.141284] mmcblk0: error -110 sending status command, retrying
> [   22.153150] mmcblk0: error -110 sending status command, retrying
> [   22.164708] mmcblk0: error -110 sending status command, aborting
> [   22.176097] end_request: I/O error, dev mmcblk0, sector 4430104
> [..]
>
> Digging down, the -110 is coming from:
>
> int mmc_card_sleepawake(struct mmc_host *host, int sleep)
> {
>        struct mmc_command cmd = {0};
>        struct mmc_card *card = host->card;
>        int err;
>
>        if (sleep)
>                mmc_deselect_cards(host);
>
>        cmd.opcode = MMC_SLEEP_AWAKE;
>        cmd.arg = card->rca << 16;
>        if (sleep)
>                cmd.arg |= 1 << 15;
>
>        cmd.flags = MMC_RSP_R1B | MMC_CMD_AC;
>        err = mmc_wait_for_cmd(host, &cmd, 0);
>        if (err)
>                return err;
>        [..]
>
> Has anyone tried sleepawake on an SEM04G before?
>
Hi Chris,

I tried eMMC 4.41 device (Sandisk SEM08G) with
omap4, both CMD5 sleep/awake is successful

mmc_card_sleepawake (host, 1)
[   20.094451] mmc0: starting CMD7 arg 00000000 flags 00000000
[   20.103576] omap_hsmmc omap_hsmmc.1: mmc0: CMD7, argument 0x00000000
[   20.103576] omap_hsmmc omap_hsmmc.1: IRQ Status is 1
[   20.110229] mmc0: req done (CMD7): 0: 00000000 00000000 00000000 00000000
[   20.122528] mmc0: starting CMD5 arg 00018000 flags 0000001d
[   20.128356] omap_hsmmc omap_hsmmc.1: mmc0: CMD5, argument 0x00018000
[   20.135040] omap_hsmmc omap_hsmmc.1: IRQ Status is 1
[   20.140228] omap_hsmmc omap_hsmmc.1: IRQ Status is 2
[   20.140228] mmc0: req done (CMD5): 0: 00000600 00000000 00000000 00000000
[   20.152526] mmc0: clock 0Hz busmode 1 powermode 0 cs 0 Vdd 0 width 0 timing 0

mmc_card_sleepawake (host, 0)
[   32.875762] mmc0: starting CMD5 arg 00010000 flags 0000001d
[   32.881591] omap_hsmmc omap_hsmmc.1: mmc0: CMD5, argument 0x00010000
[   32.888549] omap_hsmmc omap_hsmmc.1: IRQ Status is 1
[   32.893737] omap_hsmmc omap_hsmmc.1: IRQ Status is 2
[   32.898925] mmc0: req done (CMD5): 0: 00001400 00000000 00000000 00000000
[   32.906066] mmc0: starting CMD7 arg 00010000 flags 00000015
[   32.911895] omap_hsmmc omap_hsmmc.1: mmc0: CMD7, argument 0x00010000
[   32.918884] omap_hsmmc omap_hsmmc.1: IRQ Status is 1
[   32.918884] mmc0: req done (CMD7): 0: 00000700 00000000 00000000 00000000
[   32.931182] omap_hsmmc omap_hsmmc.1: disabled

> It seems likely (I haven't tested yet, but will do) that the card
> actually went into sleep successfully and is waiting for an AWAKE
> command, even though mmc_wait_for_cmd() returned a timeout.
> If so, any suggestions on how to handle that case?
>
> Thanks,
>
> - Chris.
> --
> Chris Ball   <cjb@xxxxxxxxxx>   <http://printf.net/>
> One Laptop Per Child
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux