RE: [PATCH v1 1/1] mmc: bus: print bus speed mode of UHS-I card

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




> -----Original Message-----
> From: linux-arm-msm-owner@xxxxxxxxxxxxxxx [mailto:linux-arm-msm-
> owner@xxxxxxxxxxxxxxx] On Behalf Of Aaron Lu
> Sent: Monday, March 26, 2012 8:47 AM
> To: Subhash Jadavani
> Cc: linux-mmc@xxxxxxxxxxxxxxx; linux-arm-msm@xxxxxxxxxxxxxxx;
> arindam.nath@xxxxxxx
> Subject: Re: [PATCH v1 1/1] mmc: bus: print bus speed mode of UHS-I card
> 
> Hi Subhash,
> 
> On Fri, Mar 23, 2012 at 11:26:36AM +0530, Subhash Jadavani wrote:
> > When UHS-I card is detected also print the bus speed mode in which
> > UHS-I card will be running.
> 
> The patch looks correct to me, except that I' m not sure if this is
needed.
> /sys/kernel/debug/mmc/ios also has such info.

Thanks for pointing it out.
Actually we are already printing the HS200/DDR (for eMMC) bus speed mode
along with card detected print. So why not bus speed mode for UHS-I cards.
It really gives good impression to user what this card is capable of doing
by just looking at this print.
Correct we can this information from /sys/kernel/debug/mmc/ios but this
needs extra effort than just looking at the kernel logs.

Also note that mmc_ios_show() function is currently not updated to print the
UHS-I bus speed modes in user readable format. We need to fix this as well
probably as separate patch.

Regards,
Subhash

> 
> -Aaron
> 
> >
> > Signed-off-by: Subhash Jadavani <subhashj@xxxxxxxxxxxxxx>
> > ---
> >  drivers/mmc/core/bus.c |   26 +++++++++++++++++++++++++-
> >  1 files changed, 25 insertions(+), 1 deletions(-)
> >
> > diff --git a/drivers/mmc/core/bus.c b/drivers/mmc/core/bus.c index
> > 5d011a3..0517a91 100644
> > --- a/drivers/mmc/core/bus.c
> > +++ b/drivers/mmc/core/bus.c
> > @@ -267,6 +267,7 @@ int mmc_add_card(struct mmc_card *card)  {
> >  	int ret;
> >  	const char *type;
> > +	const char *uhs_bus_speed_mode = "";
> >
> >  	dev_set_name(&card->dev, "%s:%04x", mmc_hostname(card-
> >host),
> > card->rca);
> >
> > @@ -296,6 +297,28 @@ int mmc_add_card(struct mmc_card *card)
> >  		break;
> >  	}
> >
> > +	if (mmc_sd_card_uhs(card)) {
> > +		switch (card->sd_bus_speed) {
> > +		case UHS_SDR104_BUS_SPEED:
> > +			uhs_bus_speed_mode = "SDR104 ";
> > +			break;
> > +		case UHS_SDR50_BUS_SPEED:
> > +			uhs_bus_speed_mode = "SDR50 ";
> > +			break;
> > +		case UHS_DDR50_BUS_SPEED:
> > +			uhs_bus_speed_mode = "DDR50 ";
> > +			break;
> > +		case UHS_SDR25_BUS_SPEED:
> > +			uhs_bus_speed_mode = "SDR25 ";
> > +			break;
> > +		case UHS_SDR12_BUS_SPEED:
> > +			uhs_bus_speed_mode = "SDR12 ";
> > +			break;
> > +		default:
> > +			uhs_bus_speed_mode = "";
> > +			break;
> > +		}
> > +	}
> >  	if (mmc_host_is_spi(card->host)) {
> >  		pr_info("%s: new %s%s%s card on SPI\n",
> >  			mmc_hostname(card->host),
> > @@ -303,12 +326,13 @@ int mmc_add_card(struct mmc_card *card)
> >  			mmc_card_ddr_mode(card) ? "DDR " : "",
> >  			type);
> >  	} else {
> > -		pr_info("%s: new %s%s%s%s card at address %04x\n",
> > +		pr_info("%s: new %s%s%s%s%s card at address %04x\n",
> >  			mmc_hostname(card->host),
> >  			mmc_card_uhs(card) ? "ultra high speed " :
> >  			(mmc_card_highspeed(card) ? "high speed " : ""),
> >  			(mmc_card_hs200(card) ? "HS200 " : ""),
> >  			mmc_card_ddr_mode(card) ? "DDR " : "",
> > +			uhs_bus_speed_mode,
> >  			type, card->rca);
> >  	}
> >
> > --
> > 1.7.1.1
> >
> > --
> > Sent by a consultant of the Qualcomm Innovation Center, Inc.
> > The Qualcomm Innovation Center, Inc. is a member of the Code Aurora
> Forum.
> > --
> > To unsubscribe from this list: send the line "unsubscribe linux-mmc"
> > in the body of a message to majordomo@xxxxxxxxxxxxxxx More
> majordomo
> > info at  http://vger.kernel.org/majordomo-info.html
> >
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-arm-msm"
in
> the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo
> info at  http://vger.kernel.org/majordomo-info.html

--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux