Signed-off-by: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
Signed-off-by: Kyungmin Park <kyungmin.park@xxxxxxxxxxx>
---
arch/arm/plat-samsung/include/plat/sdhci.h | 53 +-----------------
include/linux/mmc/sdhci-s3c.h | 84 ++++++++++++++++++++++++++++
2 files changed, 85 insertions(+), 52 deletions(-)
create mode 100644 include/linux/mmc/sdhci-s3c.h
diff --git a/arch/arm/plat-samsung/include/plat/sdhci.h b/arch/arm/plat-samsung/include/plat/sdhci.h
index 95a6e19..f2d4f60 100644
--- a/arch/arm/plat-samsung/include/plat/sdhci.h
+++ b/arch/arm/plat-samsung/include/plat/sdhci.h
@@ -19,58 +19,7 @@
#define __PLAT_S3C_SDHCI_H __FILE__
#include <plat/devs.h>
-
-struct platform_device;
-struct mmc_host;
-struct mmc_card;
-struct mmc_ios;
-
-enum cd_types {
- S3C_SDHCI_CD_INTERNAL, /* use mmc internal CD line */
- S3C_SDHCI_CD_EXTERNAL, /* use external callback */
- S3C_SDHCI_CD_GPIO, /* use external gpio pin for CD line */
- S3C_SDHCI_CD_NONE, /* no CD line, use polling to detect card */
- S3C_SDHCI_CD_PERMANENT, /* no CD line, card permanently wired to host */
-};
-
-/**
- * struct s3c_sdhci_platdata() - Platform device data for Samsung SDHCI
- * @max_width: The maximum number of data bits supported.
- * @host_caps: Standard MMC host capabilities bit field.
- * @cd_type: Type of Card Detection method (see cd_types enum above)
- * @ext_cd_init: Initialize external card detect subsystem. Called on
- * sdhci-s3c driver probe when cd_type == S3C_SDHCI_CD_EXTERNAL.
- * notify_func argument is a callback to the sdhci-s3c driver
- * that triggers the card detection event. Callback arguments:
- * dev is pointer to platform device of the host controller,
- * state is new state of the card (0 - removed, 1 - inserted).
- * @ext_cd_cleanup: Cleanup external card detect subsystem. Called on
- * sdhci-s3c driver remove when cd_type == S3C_SDHCI_CD_EXTERNAL.
- * notify_func argument is the same callback as for ext_cd_init.
- * @ext_cd_gpio: gpio pin used for external CD line, valid only if
- * cd_type == S3C_SDHCI_CD_GPIO
- * @ext_cd_gpio_invert: invert values for external CD gpio line
- * @cfg_gpio: Configure the GPIO for a specific card bit-width
- *
- * Initialisation data specific to either the machine or the platform
- * for the device driver to use or call-back when configuring gpio or
- * card speed information.
-*/
-struct s3c_sdhci_platdata {
- unsigned int max_width;
- unsigned int host_caps;
- unsigned int pm_caps;
- enum cd_types cd_type;
-
- int ext_cd_gpio;
- bool ext_cd_gpio_invert;
- int (*ext_cd_init)(void (*notify_func)(struct platform_device *,
- int state));
- int (*ext_cd_cleanup)(void (*notify_func)(struct platform_device *,
- int state));
-
- void (*cfg_gpio)(struct platform_device *dev, int width);
-};
+#include <linux/mmc/sdhci-s3c.h>
/* s3c_sdhci_set_platdata() - common helper for setting SDHCI platform data
* @pd: The default platform data for this device.
diff --git a/include/linux/mmc/sdhci-s3c.h b/include/linux/mmc/sdhci-s3c.h
new file mode 100644
index 0000000..7dafaa4
--- /dev/null
+++ b/include/linux/mmc/sdhci-s3c.h
@@ -0,0 +1,84 @@
+/*
+ * include/linux/mmc/sdhci-s3c.h
+ *
+ * SDHCI declarations specific to Samsung platform
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@xxxxxxxxxxxx>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef LINUX_MMC_SDHCI_S3C_H
+#define LINUX_MMC_SDHCI_S3C_H
+
+#include <linux/platform_device.h>
+
+struct platform_device;
+struct mmc_host;
+struct mmc_card;
+struct mmc_ios;
+enum cd_types {
+ S3C_SDHCI_CD_INTERNAL, /* use mmc internal CD line */
+ S3C_SDHCI_CD_EXTERNAL, /* use external callback */
+ S3C_SDHCI_CD_GPIO, /* use external gpio pin for CD line */
+ S3C_SDHCI_CD_NONE, /* no CD line, use polling to detect card */
+ S3C_SDHCI_CD_PERMANENT, /* no CD line, card permanently wired to host */
+};
+
+enum clk_types {
+ S3C_SDHCI_CLK_DIV_INTERNAL, /* use mmc internal clock divider */
+ S3C_SDHCI_CLK_DIV_EXTERNAL, /* use external clock divider */
+};
+
+/**
+ * struct s3c_sdhci_platdata() - Platform device data for Samsung SDHCI
+ * @max_width: The maximum number of data bits supported.
+ * @host_caps: Standard MMC host capabilities bit field.
+ * @cd_type: Type of Card Detection method (see cd_types enum above)
+ * @clk_type: Type of clock divider method (see clk_types enum above)
+ * @ext_cd_init: Initialize external card detect subsystem. Called on
+ * sdhci-s3c driver probe when cd_type == S3C_SDHCI_CD_EXTERNAL.
+ * notify_func argument is a callback to the sdhci-s3c driver
+ * that triggers the card detection event. Callback arguments:
+ * dev is pointer to platform device of the host controller,
+ * state is new state of the card (0 - removed, 1 - inserted).
+ * @ext_cd_cleanup: Cleanup external card detect subsystem. Called on
+ * sdhci-s3c driver remove when cd_type == S3C_SDHCI_CD_EXTERNAL.
+ * notify_func argument is the same callback as for ext_cd_init.
+ * @ext_cd_gpio: gpio pin used for external CD line, valid only if
+ * cd_type == S3C_SDHCI_CD_GPIO
+ * @ext_cd_gpio_invert: invert values for external CD gpio line
+ * @cfg_gpio: Configure the GPIO for a specific card bit-width
+ *
+ * Initialisation data specific to either the machine or the platform
+ * for the device driver to use or call-back when configuring gpio or
+ * card speed information.
+*/
+struct s3c_sdhci_platdata {
+ unsigned int max_width;
+ unsigned int host_caps;
+ unsigned int host_caps2;
+ unsigned int pm_caps;
+ enum cd_types cd_type;
+ enum clk_types clk_type;
+
+ char **clocks; /* set of clock sources */
+
+ int ext_cd_gpio;
+ bool ext_cd_gpio_invert;
+ int (*ext_cd_init)(void (*notify_func)(struct platform_device *,
+ int state));
+ int (*ext_cd_cleanup)(void (*notify_func)(struct platform_device *,
+ int state));
+
+ void (*cfg_gpio)(struct platform_device *dev, int width);
+};
+
+#endif /* LINUX_MMC_SDHCI_S3C_H */
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
