On Friday 24 February 2012 05:02 PM, T Krishnamoorthy, Balaji wrote:
On Thu, Feb 23, 2012 at 5:31 PM, Rajendra Nayak<rnayak@xxxxxx> wrote:
Define dt bindings for the ti-omap-hsmmc, and adapt
the driver to extract data (which was earlier passed as
platform_data) from device tree.
Signed-off-by: Rajendra Nayak<rnayak@xxxxxx>
---
.../devicetree/bindings/mmc/ti-omap-hsmmc.txt | 31 +++++++++
drivers/mmc/host/omap_hsmmc.c | 68 ++++++++++++++++++++
2 files changed, 99 insertions(+), 0 deletions(-)
create mode 100644 Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt
diff --git a/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt b/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt
new file mode 100644
index 0000000..e4fa8f0
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt
@@ -0,0 +1,31 @@
+* TI Highspeed MMC host controller for OMAP
+
+The Highspeed MMC Host Controller on TI OMAP family
+provides an interface for MMC, SD, and SDIO types of memory cards.
+
+Required properties:
+- compatible:
+ Should be "ti,omap2-hsmmc", for OMAP2/3 controllers
omap_hsmmc is applicable for omap2430 and omap3.
omap2420 has non high speed controller mmci-omap - drivers/mmc/host/omap.c
May be omap3-hsmmc compatible with omap2430 ?
Agree. I think its best in that case for me to define a
compatible "ti,omap2430-hsmmc" for omap2430 and "ti,omap3-hsmmc"
for omap3. Though the IP blocks are same, I cant think of some
common compatible string without causing confusion.
+ Should be "ti,omap4-hsmmc", for OMAP4 controllers
+- ti,hwmods: Must be "mmc<n>", n is controller instance starting 1
+- reg : should contain hsmmc registers location and length
+
+Optional properties:
+ti,dual-volt: boolean, supports dual voltage cards
+<supply-name>-supply: phandle to the regulator device tree node
+"supply-name" examples are "vmmc", "vmmc_aux" etc
+ti,bus-width: Number of data lines, default assumed is 1 if the property is missing.
+cd-gpios: GPIOs for card detection
+wp-gpios: GPIOs for write protection
+ti,non-removable: non-removable slot (like eMMC)
+
+Example:
+ mmc1: mmc@0x4809c000 {
+ compatible = "ti,omap4-hsmmc";
+ reg =<0x4809c000 0x400>;
+ ti,hwmods = "mmc1";
+ ti,dual-volt;
+ ti,bus-width =<4>;
+ vmmc-supply =<&vmmc>; /* phandle to regulator node */
+ ti,non-removable;
+ };
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
