Now that omap_hsmmc_set_power() already has a check to return 0
if !host->vcc, it seems like it can be used even on MMC4 instead
of the dummy omap_hsmmc_4_set_power().
This also helps get rid of all the host->id based check to
populate the right function for on-chip/external level
shifting and use omap_hsmmc_set_power() for all MMC modules.
Signed-off-by: Rajendra Nayak <rnayak@xxxxxx>
Tested-by: Venkatraman S <svenkatr@xxxxxx>
Tested-by: Balaji T K <balajitk@xxxxxx>
---
drivers/mmc/host/omap_hsmmc.c | 21 +--------------------
1 files changed, 1 insertions(+), 20 deletions(-)
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index f98c599..17e264b 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -297,32 +297,13 @@ static int omap_hsmmc_set_power(struct device *dev, int slot, int power_on,
return ret;
}
-static int omap_hsmmc_4_set_power(struct device *dev, int slot, int power_on,
- int vdd)
-{
- return 0;
-}
-
static int omap_hsmmc_reg_get(struct omap_hsmmc_host *host)
{
struct regulator *reg;
int ret = 0;
int ocr_value = 0;
- switch (host->id) {
- case OMAP_MMC1_DEVID:
- case OMAP_MMC2_DEVID:
- case OMAP_MMC3_DEVID:
- case OMAP_MMC5_DEVID:
- /* On-chip level shifting via PBIAS0/PBIAS1 */
- mmc_slot(host).set_power = omap_hsmmc_set_power;
- break;
- case OMAP_MMC4_DEVID:
- mmc_slot(host).set_power = omap_hsmmc_4_set_power;
- default:
- pr_err("MMC%d configuration not supported!\n", host->id);
- return -EINVAL;
- }
+ mmc_slot(host).set_power = omap_hsmmc_set_power;
reg = regulator_get(host->dev, "vmmc");
if (IS_ERR(reg)) {
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
